Airsoft Canada - Daytona Gun System

Page 5 of 5

Show 100 post(s) from this thread on one page

Airsoft Canada (https://airsoftcanada.com/forums.php)

- Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)

- - Daytona Gun System (https://airsoftcanada.com/showthread.php?t=160846)

BioRage

August 24th, 2014 00:14

Quote:

Originally Posted by Hughes (Post 1908009)

I'm not going to bug him until I have the funds and a donor ready to go. Definitely a winter project on the way.
@Bio was your ex dg m4 a woc challenge kit?

Update on my work! I found some time today to sit down to strip my fal, clean, and grease it again before any shooting. It went from needing 120+psi down to ~90psi I'm having a hard time discerning the segments on my redline gauge so don't quote me exactly. Everything went well until my tank went too low and my reg pressure dropped below 80psi. I may not even need to cut coils at this rate. Very excited by these reults

Good idea until you have the funds. My DG was a G&P WOC, got off classifieds for a decent deal. Someone sold one for $200 shipped few months back.

Nice, that's a big PSO drop. I'd leave it at 90 PSI or so.

@Spartan
+gun body
+kit
+air rig
+HPA tanks
+AEG mags

Done! (Specific bodies though unfortunately.)

spartan117

August 24th, 2014 04:28

Quote:

Originally Posted by BioRage (Post 1908039)

From what i gather, its only G&P WA receivers. Putting it together is a little bit of an issue because i don't have the proper tools.

GBBR	August 24th, 2014 20:19

PM me if you guys need anything, I am doing a last call for daytona items, after this I will no longer help get them, no more airsoft flr me

Sequential

August 24th, 2014 20:41

Quote:

Originally Posted by GBBR (Post 1908168)

PM me if you guys need anything, I am doing a last call for daytona items, after this I will no longer help get them, no more airsoft flr me

GBBR is retiring from airsoft. :salute:

Leo Pham

September 29th, 2014 15:30

I need help installing a Gen4 AK kit on my LCT AK.

some obstacles that I'm having:

1. selector switch is not fit inside the receiver (can't turn)

2. the kit's engine after being screwed down into the receiver the back-end raised up somehow.

Metro

August 18th, 2016 14:13

Hello.

I am a big GBB fan and want to get into a DaytonaKIT for a LMG

I have been looking at getting into Daytona Kit but i want the air tube out of the feed tray.

Does anyone with experience know if this mod can be done? I really don`t line the air tube coming out of the stock or the pistol grip....

I want to be able to hide the air tube on a LMG. I don`t want to have full of tube dangling around. This is one of the reason I got out of Airsoft.

Fusebox

August 18th, 2016 19:23

Technically anything is possible, but the airline comes in via the bottom of the receiver in the trigger group for anything using an M249 style gearbox. Unless you want to do some serious engineering and machine work to make it otherwise, you'd have to get a long as fuck grip line and loop it through the body somehow back up to the feed tray. I have no idea how technically feasible that is.

All times are GMT -4. The time now is 12:22.

Page 5 of 5

Show 100 post(s) from this thread on one page