|
Hey i'm deaf_shooter's brother, i replaced the nylon bushings with metal ones, i added a bearing spring guide and a new piston head. When i put it back together, i put a fully charged battery on it, it cranked once, went bang :P (louder than i remember it banging before) then it wouldn't shoot again. The motor still works when i pull the trigger, you can hear it struggleing when the trigger is pulled, when i took the motor off the mechbox but left the electrical connected, it spins when the trigger is pulled. the gears inside turn kinda but they're real hard to move (i'd assume cause they're pushing a spring). One thing i did notice though is that with the new metal bushings, they seemed to go through the mechbox housing a little further than the old nylon ones. not a huge issue but one of the bushings kind of pushes on a plastic piece on the outside of the mechbox. my brother pointed out that when he moves that piece the gun seems to fire.... kinda weird. any suggestions?
|