Airsoft Canada - View Single Post - Airsoft Surgeon Glock Slide Getting Stuck

HaloSix4 · December 14th, 2010, 18:19

So today I received my Airsoft Surgeon Glock Slide, after installing everything, there was a problem The slide pulls back fine, but gets jammed going forward, it goes a bout 3/4 the way and jams up badly, I literally need a hammer to bash it forward, it will not move with out the hammer.

It seems to be getting jammed up around the back of the slide around the BBU. took the BBU out and it worked fine, but I can not pinpoint, were it is getting held up. I will try to get some pictures later on.

Thanks

December 14th, 2010, 18:19	#1
HaloSix4 aka Halo64 Trader rating Join Date: Jul 2007 Location: Omemee, ON	Airsoft Surgeon Glock Slide Getting Stuck So today I received my Airsoft Surgeon Glock Slide, after installing everything, there was a problem The slide pulls back fine, but gets jammed going forward, it goes a bout 3/4 the way and jams up badly, I literally need a hammer to bash it forward, it will not move with out the hammer. It seems to be getting jammed up around the back of the slide around the BBU. took the BBU out and it worked fine, but I can not pinpoint, were it is getting held up. I will try to get some pictures later on. Thanks