|
I've said it right in my first post that it uses a serial plug to connect to computers, so (if you read my post) you knew if when you purchased it.
For your other questions I can't really help you right now as I'm on my laptop away from home, but from what I can remember
1. If it's not off already, turn off the radio
2. Plug the radio in the computer
3. Launch the software
4. Turn on the radio
5. Click on "read" (to test if the connection is good)
6. Import the frequency file (attached to this post)
7. Click on "write to radio"; wait for the dialog to say completed
8. Unplug the radio.
Now if you don't see the presets you entered, press the [GR] button. It will switch between manual mode and preset mode. It should display the preset # on the top right (from 00 to 99).
VoilĂ*.
EDIT: The software has several bugs (as said on 2nd post, first page), but still works. It did display "error" on mine, but after I pressed [GR] to get into Preset mode it still worked perfectly.
|