Airsoft Canada - View Single Post - REVIEW: AN/PRC-148 MBITR, working replica by United-Star

Lucky131 · March 26th, 2011, 15:41

Plain simple ... detach the battery, unscrew all screws at the rear, unscrew the screws in the side, take the soft part on the side and the frame out (where the ptt, etc. switch is), take off volume and channel knob (upwards - hard to get off but they are only pressed on), then the frontscrews then you should be able to seperate front and back ( you need to lift up the front panel a little bit on the side to get it over the aluminum shell and at last you can lift up the upper panel (panel goes over the antenna and ptt plug w/o problems) .... hope i wrote it understandable (sry english is not my native language ^^)

btw, remember wich screw goes where ... there are longer and shorter ones .... and be carefull after the threads strip easily if you screw them in with to much force ... it´s only plastic

Could post a how-to as soon i get mine back from a friend

March 26th, 2011, 15:41	#221
Lucky131 Trader rating Join Date: Mar 2009 Location: Europe/Austria/Carinthia	Plain simple ... detach the battery, unscrew all screws at the rear, unscrew the screws in the side, take the soft part on the side and the frame out (where the ptt, etc. switch is), take off volume and channel knob (upwards - hard to get off but they are only pressed on), then the frontscrews then you should be able to seperate front and back ( you need to lift up the front panel a little bit on the side to get it over the aluminum shell and at last you can lift up the upper panel (panel goes over the antenna and ptt plug w/o problems) .... hope i wrote it understandable (sry english is not my native language ^^) btw, remember wich screw goes where ... there are longer and shorter ones .... and be carefull after the threads strip easily if you screw them in with to much force ... it´s only plastic Could post a how-to as soon i get mine back from a friend Last edited by Lucky131; March 26th, 2011 at 15:43..