Airsoft Canada - View Single Post - [CM048S] Piston head bearings stuck, piston not travelling, cylinder head/nozzle questions (Spring issue fixed)

Xedilian · July 27th, 2015, 01:32

Thinking of going with lonex piston / piston head combo. Have to make sure the stock gears are the right width. If i'm not mistaken, this is a hybird VFC/LCT clone.

Does anyone know if all of this will fit together?

Modify SP110 spring
Lonex extreme toughness (red)
Lonex POM Piston head
Stock V3 VFC-clone gearbox

OR I could go for SHS 15 teeth piston
OR I'll just make a new thread for this whole thing.

Thanks for the help guys

July 27th, 2015, 01:32	#12
Xedilian Trader rating Join Date: Feb 2011 Location: The 450	Thinking of going with lonex piston / piston head combo. Have to make sure the stock gears are the right width. If i'm not mistaken, this is a hybird VFC/LCT clone. Does anyone know if all of this will fit together? Modify SP110 spring Lonex extreme toughness (red) Lonex POM Piston head Stock V3 VFC-clone gearbox OR I could go for SHS 15 teeth piston OR I'll just make a new thread for this whole thing. Thanks for the help guys __________________ GIT GUD OR STAY PLEB Last edited by Xedilian; July 27th, 2015 at 01:50..