|
The following parts in a Kraken are worth your serious consideration for upgrading to durable/reliable/quality parts:
- tappet plate (Modify v3)
- air nozzle (Modify air seal)
- spring guide (Modify bearing v3)
- spring (for FPS...if you do all these parts and set it up nicely a Modify S100 will put you safely under most field limits, 400fps...a Modify S110 might put you over)
- piston head (Modify poly vented bearing)
- piston (Modify poly, full tooth)
- grease (stickyG stuff is pretty good)
- cylinder head (Modify v3)
- cylinder (maybe not if the interior surface is smooth)
- inner barrel (Madbull 6.03 black python v2...AK length)
- hopup rubber (with this setup I'd use a Guarder black)
- shims (Modify ones are fine...but shims are shims)
For most, if not all of those parts...Modify makes quite good stuff, and airsoftparts stocks them all.
BTW...all of those parts may not be necessary...your piston/nozzle compression just might need to be tweaked.
Good luck!
Tys
|