Airsoft Canada - View Single Post

mcguyver · November 3rd, 2008, 21:26

Oz, get a metric thread file. All you need is the 1.00mm pitch anyways, and they cost about $15 or so.

I didn't need to do any mods to fit the PDI in my M16, and this was the Gen 1 aluminum outer barrel as well. I would venture to guess that PDI's 6.04mm may really be 6.035mm, but I don't have the precision in my calipers to measure that small.

November 3rd, 2008, 21:26	#115
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	Oz, get a metric thread file. All you need is the 1.00mm pitch anyways, and they cost about $15 or so. I didn't need to do any mods to fit the PDI in my M16, and this was the Gen 1 aluminum outer barrel as well. I would venture to guess that PDI's 6.04mm may really be 6.035mm, but I don't have the precision in my calipers to measure that small. __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.