Bullpup M14

[Flippy]

My next project is a Bullpup M14, exactly that(AWCG2A):

I started with a normal ACM ABS stock:

After I covered it with PVC/PUR foam blocks:

Next I sanded it into form:

Then I covered it with polyesther resin/fiberglass laminate:

I made the cheek piece same way:

Some days ago I sanded... sanded... and sanded:

The reason of posting here too, that I really need L85/SA80 trigger dimensions:
-Thickness in mms(form is OK from plans, but I don't know the "third dimension of it")?
-Cross section shape(at back contour "sharp" or "flat")?
If you have this gun(SA80/L85) please post here at least th thickness... please... Thanx!

[R.I.T.Z]

Awesome progress !
how are you doing the wiring?

[Strelok]

Huh, this is brilliant.

I've been wanting to make a bullpup SMG based off of a mac11. Where do you buy the materials to do this? Very interested...

[Gunny_McSmith]

Fiberglass airsoft... mmmmmm

[Flippy]

-full auto: trigger switch 'bridged'
-semi auto: full auto+burst wizard set into 'DMR-mode'(1 shoot/s).
-a toggle switch to select between the two functions(right-full/middle-safe/left-semi)
-electro trigger(to on/off the function)

I think google will show you where to get materials(also used for sailing boat building/repair)

[THe_Silencer]

VERY impressive work!

[Styrak]

So yours looks like it's going to be fairly shorter than the one pictured eh? Or are you going to use a full length barrel set?

[The Chad]

That is beautiful. Good job, excited to see the finished product. Maybe...patent?

[Azathoth]

Great job so far!!

I would love to see you on the field

[T-Hell]

what measurements do you need from the L85. I have the ICS version perhaps I can help

[Flippy]

Originally Posted by T-Hell

what measurements do you need from the L85. I have the ICS version perhaps I can help

That's great!
-At arrow: sharp or or flat(and which cross-section type)?
-At "X": thickness from left to right side of the trigger in mms(perpendicular to photo's level)?


And thanx again!!!

I'm in Europe so sadly we can't met on battlefield...

I'll use short barrel, with the long version's flash hinder...

[Red62]

Very, very nice! I approve!

[Flippy]

I worked on the metall parts, and the rubber stock end(It can be finished 100% just after the stock is painted):

I cut off the front sight... but it looks like "removed" like on this photo:

[Flippy]

Now metall parts fit into the stock(including battery). I have to make the trigger system, and finish the charging handle. I'll use that red/green dot on it.

[Jimski]

impressive work!