|
|
|
May 9th, 2013, 22:05
|
#91 |
|
We should get a mag capability sheet going. So far I know the Elite Force Mid caps do not work.
|
|
|
|
|
June 14th, 2013, 14:43
|
#92 |
|
Some people on this forum have actually purchased this gun. Since it's a decent amount into the season, I was wondering if anyone has anymore impressions on how it functions?
|
|
|
|
|
July 20th, 2013, 20:26
|
#93 |
|
I replaced my cut off lever and anti-reversal latch and now my spring release doesn't seem to work. Any ideas?
|
|
|
|
|
|
July 20th, 2013, 20:37
|
#94 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
obvious answer would be you didn't put something back together correctly lol
|
|
|
|
|
July 20th, 2013, 21:41
|
#95 |
|
I got a question before I get this for my birthday. Are the cylinders proprietary? Can you change the piston yourself or if your piston strips you gotta buy a new one.
__________________
Armoury: TM M4A1 ICS M4A1 JG M4A1 |
|
|
|
|
July 20th, 2013, 21:48
|
#96 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
You can always change a piston yourself, and when a piston strips you usually have to buy a new one...
cylinder is probably proprietary since the piston is undersize, but apparently they use ptw springs |
|
|
|
|
July 20th, 2013, 22:13
|
#97 |
|
|
What I meant by buying new one was buying a whole new cylinder as I watched videos on the cylinder and apparently the nozzle is attached to the piston head so I was just curious as to how you would take everything apart.
__________________
Armoury: TM M4A1 ICS M4A1 JG M4A1 |
|
|
|
|
July 21st, 2013, 01:41
|
#98 |
|
formerly steyr
|
Nozzle attached to piston head? Pull.
|
|
|
|
|
July 21st, 2013, 02:00
|
#99 |
|
|
Alright I guess i'll know when I get it.
__________________
Armoury: TM M4A1 ICS M4A1 JG M4A1 |
|
|
|
|
July 22nd, 2013, 10:47
|
#100 | ||
|
Quote:
I have never seen or heard of a breaking. However, the teeth on the piston is another matter. A couple of the WE Katana's that I have seen people run are great especially when they are kept stock. Some people are "upgrading" the gears and winding up with stripped piston racks. etc. The cylinders heads/nozzles are the same features found in the PTW and the systema revolution gearbox, they are not taken apart like a AEG. In a nutshell, a WE Katana is a ICS split gearbox lower with a PTW cylinder instead of the clunky ICS upper gearbox and a AEG hopup.
__________________
Do you know what ruins airsoft? (Chair), (Drama), (Air), (Sugar) softers, filthy casuals --- Quote:
WANTED PTW Receiver PRIME, STG, Factory |
||
|
|
|
|
July 22nd, 2013, 12:53
|
#101 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
Wrath told me they come short stroked, so if you upgrade the gears, you need to shave some teeth off the sector gear
|
|
|
|
|
July 22nd, 2013, 13:07
|
#102 |
|
formerly steyr
|
I read it in post 88 of this very thread lol.
|
|
|
|
|
July 22nd, 2013, 15:24
|
#103 | |
|
Quote:
|
||
|
|
|
|
July 22nd, 2013, 16:11
|
#104 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
from my understanding the release is connected to the selector switch somehow, I'm guess a tab that the selector hits on the outside of the mechbox shell that's hooked up to the anti reversal latch?
So without having looked inside, I'd say either a piece that works between the selector and anti reversal is missing, or the original anti reversal is proprietary and has a release mechanism on it? |
|
|
|
|
July 23rd, 2013, 15:41
|
#105 |
|
I've wrote a small description about main difference between PTW and Katana air cylinder.
There is also a compatibility list of each component. I got my informations regarding Katana in your forum ad i hope my review could help somebody in the same way. If interested i can translate everything for you. Let me know. http://airsoft-army.com/showthread.php?tid=2021 |
|
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
|
