Ultimate - sniper rifle - thread

[mateba]

Yes, that would be fitting but I was thinking of trying a DIY Kydex adjustable cheek rest.

[Ghillie973]

Here's my CA M24. Fully upgraded, shooting around 450fps.

[FOX_111]

Nice. I like the paint pattern. It's not Gucci, but it's effective like it's supposed to be.

[Ghillie973]

It's actually a tan base than I used a strip of burlap to stencil on the green. You can't see it in the pic but it looks like tan burlap painted onto it. It was still too smooth so I just spray painted burlap and wrapped it around the rifle. Ghillie wraps are nice but I find they get caught up on too much stuff.

[FOX_111]

Indeed. That's why I don't use my rifle ghillie anymore. It got a lot of dirt and jute crap in my rifle. After every game, I had to dismantle the rifle to remove all that crap.

[SEALs]

Amen to that!

[CDN_Stalker]

Originally Posted by FOX_111

Indeed. That's why I don't use my rifle ghillie anymore. It got a lot of dirt and jute crap in my rifle. After every game, I had to dismantle the rifle to remove all that crap.

I take mine apart every 6 months to lube and tweak it. Anyone ever seen me without my rifle on my back? I get little fibers here and there inside the trigger assembly and on the cylinder, but it doesn't affect anything internally. Maybe my clean cylinder is because I use dry graphite/teflon lube on the surface of it, doesn't attract crap.

[Marksman]

some pictures of my new heavy sniper project, still under construction should be completly done in a week or 2 only waiting for parts to arrive,



Hurricane M82A1 / A3 Barret ( new version of the old M82A1 )
M3 Scope
KA scope mount
KA Reinforced Selector Lever
KA M16 VN mag 85rds
KA M4 Metal Hop-up
Guarder Large pistol grip
Prometheus Hard type Hop-up
PDI 6.04 650mm tight bore barrel

Systema Complete Mecha-Box & Motor Magnum Set:
-M170 Spring
-Reinforced Gearbox with 7mm Bearing
-Teflon Cylinder Set
-All Helical Gear Set Super Torque
-Low Resistance Switch Assembly
-Magnum Motor Long Type
-Selector Plate / Tappet Plate / etc.
Sanyo 10.8v Large type battery 3600mah

more pictures coming soon!

[FOX_111]

Just wow!

It's an AEG? what fps do you expect it to shoot?

[Happy_Killmore]

Originally Posted by FOX_111

Just wow!

It's an AEG? what fps do you expect it to shoot?

If hes running the M170 in it, around 550fps-600fps.

[Screamer-]

you only bought the body and you build on it ... wow

[Marksman]

yep its an AEG and just like '' Happy_Killmore '' said it should shoot around 550 to 600fps with 0.20g but I will use 0.43g for this one


The Hurricane kit only include the body, barrel, .50 mag, bi-pod, carry handle, tools, manual, etc and it come in a nice foam case

[FOX_111]

Originally Posted by Happy_Killmore

If hes running the M170 in it, around 550fps-600fps.

I don't know my spring chart...

600fps (0.20g) using .36g (447fps) give you a very nice engagement range. If the field allow for 100 feets of minimum engagement distance.

It really put the role of sniper into perspective!

[CDN_Stalker]

550fps with 0.20g will be 450fps using 0.36g BBs (in my M24 with Laylax 170 spring). In all guns I've tested various weights in, there is a 100fps difference between 0.20g and 0.36g BBs. Pretty easy rule of thumb right there, gives you a ballpark velocity if you are using 0.28g (divide by half, ~50fps difference between 0.20g and 0.28g).

[Screamer-]

don,t forgot with this FPS... probably the HOp up will be damage in a low laps of time