These fuckers are growing on me...

With a bit of modification (removing the raised area in front of the front sight) and a new paintjob... this thing would look pretty awesome..

i just wish i had a left handed handle. the front handgrip is amazingly comfortable
its powerful enough that if you hold onto a soda can it goes straight through both sides of the can and keeps on going pretty far. i think evike listed it at 390 to 400+ fps. with the lipoly battery the rof is so high that a quick burst on full auto hits the target with almost a precision shotgun effect.

we did this accuracy test. my brother stuck 22 cal. shells into the dirt about 10 to 12 feet away which i do not reccomend. i was able to hit each one setting it off in two to three shots on semi auto

Wow you're a smart one.

it was his idea actually. i didnt like it but he wouldnt listen to me to not do it
i figured better him have an adult there while doing something stupid than being alone

or you know be the mature one and tell him shooting bb's at somethign that could potential harm or kill you is a stupid idea

yea i did. my brother is an american teenager, what else can i say?
im glad somebody else agrees with me that its a dumb idea cuz nobody around here listens to me.
i couldnt make him not do it so i felt better about my decision to be there and do it instead of him so he would not be out doing it by himself and get hurt

another thing for people who think poorly of the ika zuchi. you might feel a little differently about it once you get it in your hands. this thing is amazingly comfortable to hold. think m4 that feels like a p90

+1

That exactly my 1st impression!! Feel like a p90 with comfort!!
I did not make a chrono on it... but sure it around 350fps!!
This baby with the supressor give you more auccuracy!

Apparently you can buy any M4 grip and change it, since it is based off an M4...

Get one that is ambi, or a lefty one.

I want one... I have M4s, but now this is a reason to get one... and use some AR mags...

Also, it would be nice if that stock was able to be modded to fit a crane stock in it... a lot more battery space!!

From the look, a bit of hacking would do the trick.

*edit*

I HATE M4s.... my bad

it looks like a regular tube for the stock, i dont see any need in hacking, just some rewiring

anyone know if this king arms m16 grip would fit on the ika zuchi m4?
http://ehobbyasia.sev72.001at.com/eb...tan_1_mark.jpg
it appears to be ambidextrous like this armalite m4 grip that i dont like as much
http://i18.ebayimg.com/04/i/000/ee/a2/18a8_1.JPG

Nope it sure wont. A little modding and it might.

i guess im just gonna have to keep searching ebay over time to find something that fits. i love the grip it came with, its just not left handed

You wont find anything that will that has any type of back piece that covers the back end of the lower. The design of the rear of the upper prevents that.

Your best bet is to select something that has no back piece that goes on the lower. Something like this. Except this is a right hand grip.
http://www.airsoftparts.ca/store2/in...roducts_id=405

However with slight modding to the upper or to the grip itself it should be able to fit.

and thats the exact style of grip mine came with. plus i dont feel like paying that much for one
i was thinking about going so far as to just file/sand down the thumb rest a little to make it not get in the way so much
dont worry ill eventually find one or mod the one i have. thanks for the help though, you at least saved me the little bit of money for something that might not fit

Almost any grip will fit, you just won't be able to add the little palm rest at the bottom of it.

And, you might have to hack a little bit of the Poseidon body in order to fit some grips (like the KA one you shown).

I have worked on an M4 this week, with the Magpul grip... awesome feel to it.

isnt the thing at the bottom of the grip what holds the motor on the gearbox? i started unscrewing the screws to see how well itd come off and the motor started pushing the plate off so i put it back on and didnt mess wit hit anymore. i had to really push that plate in hard to get the screw into the threads. if thats what you meant
also the posiedon body doesnt come anywhere near the grip so i dont think any of that would have to be modded. if it did id rather take a chunk out of the grip itself to make it fit
i think ambidextrous hand grips should be standard on guns

i filed the thumbrest down a good bit. still sticks out into my hand but not nearly as much. more fun than payin money for another grip

came accross this on ehobby. made me think of this thread. at first i thought like whoa cool but then i looked at it longer and was like ....the hell? it just looks like a mess
http://www.ehobbyasia.com/ebayphoto_...p90_1_mark.jpg
http://cgi.ebay.com/EAC-P90-RAS-CUST...QQcmdZViewItem

that gun is 100% FAIL