They are not.

I didnt think so either but at the game I was using em and before it happened my buddie told me not to use them because his guns were having a peoblem with them and they messed up his internals as well. MY RS was brand new out of the box, it worked well for about maybe 400 rounds of these and its broken

I have done no poking around in the mechbox. I am pretty sure that RS is very good at putting their guns together. The only other thing that I could think is wrong is the mags I was using but i dont understand how that would do it.

Also I have been airsofting for over 4 years pusangani and I have had my fair share of internal problems. It would be nice if you were a little bit more polite. You can think of me as a noob if you want i could care less but we are all airsofters here and instead of lighting people up we should help each other.

On a side note I probably should have posted this asking If anybody has had any problems with this brand, my bad

Madbull bbs are ok. Nowhere near as good as bastards, but they get the job done. I would only ever buy them now for their .25 tracer rounds. Other than that, it's bastards for the win

Ive never had any problem with bastards so I think I am going to switch... now all I need is to get a new piston. I havent opened it But I am pretty sure the teeth are stripped

RS pistons are unique, so make sure you get realsword brand.

I find that madbull BB's are almost "crayon like" if you rub 'em against a black peice of paper you can pretty much draw with them..

I don't want any BB streaks in my tight-bore!

what bbs were you using before the problem? I still think you just had a few bad ones that f'ed up your internals. Even though I had no problem with madbull, I do find that their bbs are more soft than bastard. and that could be a problem for some guns.

I've had bad experiences with Madbulls in the past, might have been a bad bag... might just be bad QC.

Lol specs, welcome to the club, nobody i know in kingston likes madbull bbs. they suck ass.

Ok i think ill just switch to bastards for sure. Ya Im pretty new to RS so where can I get parts? Anywhere in Canada

Nowhere Canadian carries readily available parts for RS unfortunately.

You can get new pistons on www.ehobbyasia.com

If you need a tech I'm probably the tech that is most familiar with Realsword guns on ASC.

My team runs about 9 Type 56 and Type 56-1,

This year alone I've probably done full upgrades on about 15 to 20 of them.

my team and i here shot over 6 case of madbull .20 and .25 never had jam or break.
Also i wonder how did a bb broke your piston since tapet plate is loose and holded with a spring its not really related.

Ment.

no issues with their .2/.25/.3. fyi madbulls are rated 5.95mm while bastards are 6mm

Thats actually the only bb i have used with it, it lasted a few hundred on a separate occasion

jams barrel, piston gets held half way back from the air pressure then the gear strips those teeth that are still moving forward.
It's not the bbs that strip the piston its the air pressure caused by the jam thats caused by the bbs.