Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)
-   -   Want to buy an m9, best brand? (https://airsoftcanada.com/showthread.php?t=149055)

Ricochet November 11th, 2013 14:07

Plus 1
- KWA
- KSC
- TM

Minus 1
- KJW

JDoorn November 14th, 2013 11:26

The gas efficiency of the KWA M9 PTP is awesome. I'll go 2 mag reloads before I need to refill gas. I'm not sure where you heard the KWA is not a 1:1. as far as I know it is. It's also the same weight as the real steel counter part with a full mag. I can vouche for that as my brother in law has a real steel M9. I'd say as long as trades aren't a deal breaker for you go with the KWA.

Also I'll +1 the easy parts acquisition, as I have ordered from the KWA proshop with no problems at all. If you do need to get a new trigger return spring (which I have, and is the only part I've needed to fix) get a couple of them and a new hop unit and anything else you might want to fix up, and save yourself paying for shipping more than once.

Crossfire034 November 14th, 2013 16:05

Can't speak for other brands but I've had a KJW M9A1 for a few months now. Had to replace the hopup rubber to get consistent shots, but it's been shooting fine ever since. Usually get two-to-three magazines with one fill of gas, so about 50-70 rounds. Only issues I have are the weird hopup unit (which requires a small allen key to adjust) and an easily scratchable finish.

BioRage November 22nd, 2013 09:16

Ah,

Should of posted it, Revolution Airsoft had the KWA M9 PTP on special for $143.

You could try e-mailing them to get it again?


All times are GMT -4. The time now is 01:04.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.