Airsoft Canada - Question: Inner Barrel Upgrade for KP-05

Airsoft Canada (https://airsoftcanada.com/forums.php)

- Upgrades & Modifications (https://airsoftcanada.com/forumdisplay.php?f=24)

- - Question: Inner Barrel Upgrade for KP-05 (https://airsoftcanada.com/showthread.php?t=168932)

Quote:

Originally Posted by ardo (Post 1923633)

The only negative so far: I have the hop up turned completely off, and when I tip the gun down, the chambered BB falls out after the slide goes into battery. I might have to give it just a bit of a hop for the BB to stay put.

Because it's the hop rubber that actually prevents the BB from rolling out the barrel after the air nozzle pushes it into the barrel.

Also, nineball is laylax/prometheus, so I'm not surprised if they're slightly better than PDI. PDI and laylax are back and forth at being the best.
I totally forgot nineball made hop rubbers -_-

Quote:

Originally Posted by ardo (Post 1923633)

Turned off, its supposed to roll out. Sometimes the pressure or force from he loading nozzle is just enough to slightly push the bb out of the rubber and down the barrel. If you are having issues with the hop-up on and still having bb's roll out that is an issue with the adjustment arm.

Quote:

Originally Posted by ThunderCactus (Post 1923646)

Also, nineball is laylax/prometheus, so I'm not surprised if they're slightly better than PDI. PDI and laylax are back and forth at being the best.
I totally forgot nineball made hop rubbers -_-

Laylax FTW.

Thank you all for advise. I'm not looking to build an airsoft IPSC gun, the goal is to have a training tool that approximates my RS production pistol and allows me to have a meaningful practice.

I sourced whatever was available locally, and am perfectly happy with the upgrade I got for under $60, just need to sort out a few small things.

Thanks again.