Airsoft Canada
Page 2 of 2 1 2
Show 100 post(s) from this thread on one page

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Upgrades & Modifications (https://airsoftcanada.com/forumdisplay.php?f=24)
-   -   HPA conversion question (https://airsoftcanada.com/showthread.php?t=169139)

Kos-Mos December 16th, 2014 15:23
Quote:
Originally Posted by phantaxtic (Post 1924592)
How can the two mags be made the exact same if co2 operates at 800 psi and propane at about 120 psi?
Not exact, they just change the size of the ports on the valve to lower the FPS.

As I said, CO2 mags usually use hard seals instead of o-ring.

phantaxtic December 16th, 2014 19:53
I see. Thanks Kos Mos.

Any ideas of the failure point of a green gas mag?


All times are GMT -4. The time now is 08:14.
Page 2 of 2 1 2
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.