Airsoft Canada - Importing an Entire Slide

Airsoft Canada (https://airsoftcanada.com/forums.php)

- Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)

- - Importing an Entire Slide (https://airsoftcanada.com/showthread.php?t=44024)

Quote:

Originally Posted by Styrak (Post 532642)

You're new to the forums, I've seen your other posts, and slides CAN be imported. Did you actually have anything to add to this thread? Or any evidence?

I was about to say that. Would be nice if he actualy reads the posts, and get his information right.

AFAIK slides are ok. My buddy ordered his from UNC and it came in. Package WAS open and held by customs for a couple days but he still received everything. That was 8-10 months ago.

I know the outer barrel can be tricky. Best you can do is check the approve size (+105mm i think?) and make sure the content is clearly describe in a letter in the package. Or else customs *might* not even bother to check the size and just hold it. Better safe than sorry i say.

This is a good thread for me since I plan to at some point buy a KSC MK23 metal slide kit and had been wondering how I could get it in safely.

any updatez on that?
I'd like to import a slide for a glock 26, the barrel is less than 90mm...

Fuck, how do you import a
partial slide? lol.

Well if you kiddies haven't
been paying attention, even
a real steel slide isn't the
restricted part you have to
worry about.

PS: anyone looking for a
partial slide I promise to
only give you the tip!

I was reading styraks post about regan being new to the site and was thinking WTF he has been here for like 3 years, then when jimski asked how it went I checked the post date and it made alot more sense.

This brings back memories...

Dear lord...
Brought one of my first threads back to life.

yeah thanks for commenting on that but I was expecting something like new info...

Quote:

Originally Posted by safx (Post 1069863)

Well if you kiddies haven't
been paying attention, even
a real steel slide isn't the
restricted part you have to
worry about.

I've been hearing yes and noes, comments about the barrel length, and random comments from people who don't really know.
So it's not really clear as of now.
I'd be quite pleased if somoeone who knows what he's talking about could post some info here, rather than the usual asc chit-chat.

Quote:

Originally Posted by Jimski (Post 1069826)

any updatez on that?
I'd like to import a slide for a glock 26, the barrel is less than 90mm...

didn't you ask this in another thread? i thought i told you, or someone, that you will have to get a retailer to import it for you cause it doesn't meet the min-barrel length requirements. if customs gets it, and opens it, they WILL seize it.

Its like ordering airsoft. Ya, it may get it, but it might not. Why wont it get it? cause its prohibited. The slide you want is for a prohibited gun. They will assume its for the real deal. Thus, its illegal. Get a retailer to import it for you.

Quote:

Originally Posted by Donster

I have seen no one confirming this, are you absolutely 100% positive about that?

also:

http://www.airsoftcanada.com/showthread.php?t=90656

Quote:

Slides:

You will not have a problem importing a slide. A slide of a real firearm, let alone an airsoft gun, is not in itself a prohibited or restricted part and does NOT require any kind of permits to import. This is spelled out in the D-memorandum D19-13-2, which is one of dozens of regulation sources which the CBSA Officers reference regularly.

Even if confused with slide for a real pistol, it is not illegal to import a slide into Canada if properly declared.

Receivers:

The D-Memo D19-13-2 (http://www.cbsa-asfc.gc.ca/publicati...9-13-2-eng.pdf) defines a firearm as:

"a barrelled weapon from which any shot, bullet, or other projectile can be discharged and that is capable of causing serious bodily injury or death to a person, and includes any frame or receiver of such a barrelled weapon and anything that can be adapted for use as a firearm." (Page 5, right hand side).

This is where all the trouble comes from for importing receivers.

==================

Just a word on the CBSA D-Memoranda. The D-Memos compile information from numerous Acts of Parliament into a single document that puts it all into the "import/export" context.[/b] The D-Memo referenced above, for example, presents info out of the Criminal Code, the Firearms Act, as well as the Export and Import Permits Act, while D-Memos pertaining to import/export of agricultural products may reference acts such as The Health of Plants and Animals Act.

=================

Back to Airsoft parts and accessories, though! The Customs Tariff 9898.00.00 is also used to help with the determination of "prohibited devices". Feel free to read through it here on page 1757 of the PDF document to find out what's prohibited for import and what's not http://www.cbsa-asfc.gc.ca/trade-com...-01-99-eng.pdf.

Quote:

Only slides that MAY be an issue are slides for automatic guns (as the real auto ones are prohibited)

Only things you are 100% not allowed are receivers(section with the serial number on real one), pistol frames (lower part) and barrels below a certain length (though very few are shorter than this)

Silencers, mags with fake bullets and all those other things people say are illegal to import are in fact legal... you just have to dispute it when cbsa seizes it and eventually get it a few months (or years) down the road.

Quote:

Originally Posted by Jimski (Post 1070018)

I have seen no one confirming this, are you absolutely 100% positive about that?

also:

http://www.airsoftcanada.com/showthread.php?t=90656

I actually have not come across any information that'll truly help you out, The barrel for the G26 is prohibited. Too small. However I have no idea where that leaves the slide. It MAY be Ok but depending on how much it'll cost, I'd say, to be safe, order it through a retailer.

ok thank you people!

I ordered my P226's slide / barrel set from cobra airsoft. Got inspected by customs. Made it to me without an issue.

I think I'm at about 3 dozen
slides imported now... and a
few complete ones.

I've brought in compact 3.9
slides and tiny 3.9 barrels.

Customs has never stopped
anything I've ever imported
other than a receiver or a
pistol frame. And most of my
stuff gets looked at on a reg
basis.

IMO, CSBA couldn't care less
about our toy parts, other than
than the receivers/frames.