Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Gear Discussion (https://airsoftcanada.com/forumdisplay.php?f=26)
-   -   molle Serpa attachment (https://airsoftcanada.com/showthread.php?t=48527)

Graham December 3rd, 2007 02:38

well, tell ya guys what. I'll order it off eBay for $20 and tell y'all how much I like it

The Saint December 3rd, 2007 02:40

$20 before or after shipping? BlackHawk sells 'em for $15.

Graham December 3rd, 2007 02:42

good point...

either way, I'll give someone $ in exchange for a clip, and then I'll tell you lucky f*ckers how great it is, or isn't

The Saint January 5th, 2008 17:13

Any update, Graham?

ThunderCactus January 5th, 2008 17:44

I've got the CQC platform, solid as a rock.
its 2 molle high and 4 wide, uses the speedclip design where the tabs go under the molle and theres a hook on each tab that goes over the strap on the bottom side so it can't be pulled out.

The Saint January 5th, 2008 17:51

Do you have it on a plate carrier/wear it over plates, or something softer? I'm considering mounting it on a chest rig without a plate underneath, or possibly a leg drop panel, and I'm concerned about it sagging/wobbling.

MadMorbius January 5th, 2008 19:19

I wouldn't trust that thing. Speed clips are fucking garbage.

ThunderCactus January 5th, 2008 19:25

its mounted on my OTV, I have foam where the soft armor should be, and 2 thicknesses of foam where the plate should be. It's very stiff so it doesn't wobble. Although it's not necessary to get a plastic SAPI plate (which are really uncomfortable!), you should back it with high density closed cell foam. As long as the panel your mounting it on is stiff the pistol won't flop around :)


All times are GMT -4. The time now is 13:43.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.