No one?http://www.airsoftcanada.com/images/...n_banghead.gif

Well,I braved this box apart.Looks like that when the anti reversing latch
was not attached,and that when the gears reverse and the trigger is pulled,
not a pretty picture.Only the gear that pulls the piston back was stripped.
Are all gears a standard size?,I can just order three gears and the fit?.
Second question is.is there some kind of disconnect for semi,I think a part
is missing,no nothing flew out while I took it apart.:cool:

I can close this thread with good news.My parts arrived today,so
I was able to reassemble my mechhbox with only one small hiccup.
I ordered a TM replacement gear set figuring they would drop right
in and fit.Nope,the spur gear was 3/16th of an inch off on both
side and wouldn't reach the bevel or half gear.My only choice was
to reuse the old spur gear which I can find no damage or wear on.
I timed the gears,grease everything in sight attached the motor
and tadda!,it work great.I reassembled the entire gun and tested
it in all modes,it worked again,now I loaded a mag and have only
tested in semi and auto and it fired perfect.All those multi feed
rounds problems are gone.Man am I sooooo happy.:D

Spoke too soon!
 

Well,I was testing my agm prior to disassembly,I fired some rounds at a target
and it was firing in auto in the semi position,these are brand new parts,what
gives?.I have only fired five hi caps through this gun,and I did not abuse it.
These are new TM parts with lots of grease,anyone have a idea why this may
be?.Looks like I am back at the beginning again where I started with this gun.:(

Has no one had a problem when replacing a semi auto disconnect,
that after a few hi caps it doesn't work.These are TM replacement
parts,so I thought I would be good for a whole at least.There is
plenty of grease in the works to lube everything,so that is not the
problem that I can see.Anyone have any ideas?.:(

Geez, I didn't even see this thread until now. I've dealt with version 7 clone before, they can be a handful. I'd have to see it to really know what's wrong.

I'll be taking it apart today and see what is going on,if I can't figure it
out,I let you know.But if can tell me of the other problems you had,I can
look for those while I have it apart.Thanks:cool: