ok so last night i finally removed the screws from the motor plate, I have two small ones about 8mm in diameter and 5mm thick I do not have the disc when I took the gun apart it wasn't there I'll see if i can find something and try it out,
thanks!

Well, that's your problem. The motor shim disc needs to be in there. No need to investigate things further.

fixed the motor and its connections so now that's good, i'll get a spacer asap (any ideas on what might be a temporary replacement? size? ) but I made another rookie mistake...
do you know which gear spacers go on which gear and in what order?

Thank you guys so much!

They don't have a set "proper" way to go on. You have to know how to properly shim a mechbox.

It works!!!
Thanks guys!
I'm still not sure of what caused the prob but after re-wiring the motor, taking everything apart and putting it back together 3 times, 2 days of work, a costume made motor plate (small piece of plastic lol) and a lot of swearing it is now officially working!
I really appreciate your help I def couldn't have done it by myself...

i have a spare motor spacer plate for a ICS. Pm me if you need it.