Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)
-   -   This is the KJ 10/22 thread (https://airsoftcanada.com/showthread.php?t=120005)

S_Okita March 28th, 2012 23:57

Quote:

Originally Posted by SHaKaL (Post 1629924)

Ive seen the tasco kits they are close but they look kinda cheap and terrible to me. Please tell me that that isnt what kjw copied and did better lol

lleets March 29th, 2012 00:21

Quote:

Originally Posted by Viperfish (Post 1629900)
propane or duster?

on duster you can push a lighter bb but i would never use lighter then a 28 in it.

On propane, but they were .25 bios(mad**ll). It was horrible. I've shot .36s as well with this set-up, it's definately the way to go. What options are available for bios in that weight? Other than not doing it at all.

Viperfish March 29th, 2012 01:23

Quote:

Originally Posted by lleets (Post 1629982)
On propane, but they were .25 bios(mad**ll). It was horrible. I've shot .36s as well with this set-up, it's definately the way to go. What options are available for bios in that weight? Other than not doing it at all.

Far as i know we should have bio 3s coming soon. but in the meantime only bio 28.

Styrak March 29th, 2012 01:40

Quote:

Originally Posted by lleets (Post 1629982)
On propane, but they were .25 bios(mad**ll). It was horrible. I've shot .36s as well with this set-up, it's definately the way to go. What options are available for bios in that weight? Other than not doing it at all.

Do you have to use bios or something?

lleets March 29th, 2012 07:03

Quote:

Originally Posted by Styrak (Post 1630012)
Do you have to use bios or something?

it's a bio field only, so I wasn't planning on gaming the 10/22 there.

DJBackfire April 3rd, 2012 03:27

So I'm planning on setting my 10/22 up as a dmr/counter sniper weapon. I'm already planning on getting the harder hop up for it and probably use .36's in it. What else do i need internally for it? And what NON CLONE scope would you guys recommend for me? I was thinking of a 3-9x scope?

Viperfish April 3rd, 2012 04:04

ra tech tb, your going to want that as well as a long mag to help with shot constancy,

DJBackfire April 3rd, 2012 04:11

Good to know, thanks Viper, Anything else?

Viperfish April 3rd, 2012 10:01

Not really, only issue iv run into that gun is breaking my charging handle (my fault), having to reset the mag orings (easy to do) and the small mag defect some mags come with.

If you dont have any of those problems and run the tb and the hopup with 36 you should be fine.

Optics wise id choose something you like. However i have always been keen on NCstar simply because they offer a lifetime warranty that covers things like the lenses getting shot out.

DJBackfire April 3rd, 2012 13:34

Ok, thanks Viper. I'm also planning on using the 20rd mags with this setup because of how I'll be gaming it. So with the TB and the new hop up, it will be shooting around 400? With Propane or Duster? I would like to be using my baby for Claybank this year :)

Viperfish April 3rd, 2012 13:53

Ill throw some rounds threw mine with the short mag and i can give you both a propane and duster reading tonight. normally in the summer though i run duster. but i also game mine like most game an M4

DJBackfire April 4th, 2012 01:27

Oh sweet, I'll make the decision after the results come in from you!

dmr April 14th, 2012 10:55

hey i got my kjw 10/22 today and there is a few things off, the bb at about 125-150 feet curves to the right, and im using 0.28's. im also using green gas, which brings me to number 2, some lube is coming out of the barrel when i shoot. only once in a while though. also the hop up wont ajust the tragectery of the bb. could anyone plz help

Eeyore April 14th, 2012 11:04

Clean you barrel.

dmr April 14th, 2012 11:48

with what? i am really new to gas guns, but i ahve had an aeg for a year now......


All times are GMT -4. The time now is 06:35.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.