Airsoft Canada - This is the KJ 10/22 thread

Airsoft Canada (https://airsoftcanada.com/forums.php)

- Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)

- - This is the KJ 10/22 thread (https://airsoftcanada.com/showthread.php?t=120005)

ok thnx guys, was just wondering since i heard version 2 has flip sights but no threaded tip

Hey guys, which RA-Tech inner barrel length do you recommend, 363mm or 380mm?

Quote:

Originally Posted by Brigg (Post 1693663)

Hey guys, which RA-Tech inner barrel length do you recommend, 363mm or 380mm?

i think i went with the 380, id have to actualy read the number on it to be sure, but mine is the one that goes right to the end of the outer barrel. im really happy with it.

I have the 380mm and yes it goes to the end of the barrel.

Awesome, thanks for the help guys!

Quote:

Originally Posted by dmr (Post 1638181)

hey i got my kjw 10/22 today and there is a few things off, the bb at about 125-150 feet curves to the right, and im using 0.28's. im also using green gas, which brings me to number 2, some lube is coming out of the barrel when i shoot. only once in a while though. also the hop up wont ajust the tragectery of the bb. could anyone plz help

on my 10/22 using Propane I consistently get 250+ feet with it easy.

Tip 1 - get the 380mm inner from RaTech
Tip 2 - Get the RaTech hop up rubber
Tip 3 - Use .36 bb's

when i got mine (version 2) I pulled out the stock inner and put in the RATech 6.01 TB 380mm

I wanted to use the barrel stabilizer (part from the stock barrel so I had to boar it out. put it on the new RAt Inner and put it in the outer barrel.. absolutely Zero wobble..

now the tip. removed the orange paint BUT the plastic inner tip was eaten up by the chemical. so now the inner was loose at the end..

solved that by inserting a barrel extension (Reverse) into the outer barrel. had to lathe it down a bit so it would fit in super tight...

so now my 10/22 has a 14mm ccw thread on it as well... :)

the huge key to this gun's accuracy and distance I believe is the use of .36 WE BB's

I am going to try .43's as well

I use

T-hell....isn't that shooting way above limits with the full length tightbore?

When I use mine with 0.40's I'm already at the limit, it shoots 480fps on 0.20 equivalent energy level.

If I used my tightbore I'd probably be shooting 600fps 0.20 equivalent.

Using duster until my Npas arrives from RATech

Hey guys, just wondering if any of you know where I might be able to get my hands on the RA-Tech 380mm inner barrel? I ordered one from airsoft parts, but for some reason there was a mix up and I ended up with the 363mm 6.03mm barrel. There sold out now and won't be re-stocking until the end of october.

Order right from RA-Tech...

I am just about to put in an order for 2 NPAS for my and one team mates 10/22
easy to deal with

Quote:

Originally Posted by T-Hell (Post 1695322)

Order right from RA-Tech...

I am just about to put in an order for 2 NPAS for my and one team mates 10/22
easy to deal with

Nice, have you ever had any issues getting it shipped into Canada?

Quote:

Originally Posted by Brigg (Post 1695199)

I ordered mine along with some extra mags from eHobby.

Sorry for all the questions as of late, I've decided to finally start upgrading my gun and have a few of them. Has anyone had any luck installing an acm ubr stock? will a ctr/moe stock fit onto the stock buffer tube? I've looked everywhere online and can't seem to get definitive answers regarding the kc-02. Thanks again for all the help guys! :D

Stripped the thread on another original mag... (third one)

Are the straight one (30 rounder?) better on this point?

I need 3-4 more mags and i don't want to pay 40$ each and face the same problem...

Did they finally released the npas for the 10-22?

How the heck do you get the rail covers off?