Airsoft Canada
Page 24 of 66 « First 14151617181920212223 24 25262728293031323334 Last »
Show 100 post(s) from this thread on one page

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)
-   -   Tanio Koba / KJW M4 GBBR Basic Information and FAQ (https://airsoftcanada.com/showthread.php?t=96773)

Pinard March 22nd, 2011 14:56
PM'd

Cobrajr122 March 22nd, 2011 19:58
Quote:
Originally Posted by LocoYokoPoco (Post 1433415)
It's the same process as the Cradle Velocity Reducer
YouTube - Cradle Airsoft O-Ring Piston and Velocity Adjuster Installation for KJW M4

But IMO, the NPAS sucks. Mine broke in a matter of days. I would personally stick with the cradle one.
Thats how I installed it, just did not seem right, sits at a bit of an angle and was not too consistent on the chroney.

Thanks for the info.

ts10z March 22nd, 2011 20:15
Quote:
Originally Posted by Cinco Boy (Post 1433645)
I know this was covered on page 12, however I've seen people do this...the magpul m.o.e. hand guard...has anyone tried to put this on? My AEG m.o.e. hand guard is too long...milspec the way to go? Or can you adjust where the front sight sits?
Mine fit without any modifications or moving anything. It even works perfectly for an upper handguard when I mount my 203 under it. Like it was made to do that or something.

Cobrajr122 March 26th, 2011 21:52
Quote:
Originally Posted by Cobrajr122 (Post 1433869)
Thats how I installed it, just did not seem right, sits at a bit of an angle and was not too consistent on the chroney.

Thanks for the info.
Turns out it was broken, again, in the same spot as the last one. oh joy.

Cradle here I come.

taysobe April 1st, 2011 14:02
Quote:
Originally Posted by baker_Jeff (Post 1193726)
That is very odd... mine was threaded in the usual -14mm.

Jeff
mines a clockwise thread

Nova_Dust April 2nd, 2011 10:45
Just took out the inner tube and am thinking buying the TAF 509mm 6.03 TBB. Any users have tried this brand before?

Hope Tokyo-Model has it in stock, will pay them a visit tomorrow...

On the other hand, with stock 250mm inner barrel, I am quite impressed with its range. By doubling the length, I hope range, accuracy and FPS can all increase.

Nova_Dust April 3rd, 2011 05:10
Turns out that TAF is the TBB manufacturer for RA-Tech as well, so TAF/RA-Tech TBB are the same thing.

Order placed with Tokyo-Model on 509mm TAF TBB, can't wait. :D

Armed Infidel April 3rd, 2011 10:29
Quote:
Originally Posted by delarosa (Post 1420300)
-30*C?! God, I cant imagine putting my gbbr to use on such cold. But hey it shows the KJW TK is superior even to a TM :D although on different category of gun type.
Had mine out a couple of weekends ago, blasting away on full auto at -11C through 8 mags in rather quick succession and it worked flawlessly!

grimreefer April 3rd, 2011 12:25
Quote:
Originally Posted by Armed Infidel (Post 1441127)
Had mine out a couple of weekends ago, blasting away on full auto at -11C through 8 mags in rather quick succession and it worked flawlessly!
That's amazing. Did you notice any decrease in FPS or range? ROF?

Saberwing April 10th, 2011 16:28
Just got a G&P RAS for my M4, build is slowly progessing.
http://i281.photobucket.com/albums/k...5/69d97360.jpg
http://i281.photobucket.com/albums/k...5/33910a5d.jpg
http://i281.photobucket.com/albums/k...5/c80fdf7e.jpg
http://i281.photobucket.com/albums/k...5/22aa45b0.jpg
http://i281.photobucket.com/albums/k...5/5672174a.jpg
http://i281.photobucket.com/albums/k...5/0a236080.jpg

soul sniper April 10th, 2011 23:04
where can i find all cradle airsoft parts? because i cannot find the cradle bolt carrier extension

McCrea April 10th, 2011 23:23
Directly with T-Hum on arnies

Eeyore April 10th, 2011 23:23
Quote:
Originally Posted by soul sniper (Post 1445404)
where can i find all cradle airsoft parts? because i cannot find the cradle bolt carrier extension
Try contacting Amos, he can get Cradle parts.

delarosa April 11th, 2011 09:01
Quote:
Originally Posted by Saberwing (Post 1445184)
Just got a G&P RAS for my M4, build is slowly progessing.
Thats sweet looking unit you got there :)
Does the ras wobble? Im also planning to get the same part but I dont know if it would perfectly fit.

Saberwing April 12th, 2011 10:45
Quote:
Originally Posted by delarosa (Post 1445606)
Thats sweet looking unit you got there :)
Does the ras wobble? Im also planning to get the same part but I dont know if it would perfectly fit.
the G&P one I got fits perfectly, no modification and it's rock solid. I can shake it from just holding the rails and no wobble.


All times are GMT -4. The time now is 05:40.
Page 24 of 66 « First 14151617181920212223 24 25262728293031323334 Last »
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.