Airsoft Canada - Tanio Koba / KJW M4 GBBR Basic Information and FAQ

Airsoft Canada (https://airsoftcanada.com/forums.php)

- Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)

- - Tanio Koba / KJW M4 GBBR Basic Information and FAQ (https://airsoftcanada.com/showthread.php?t=96773)

Quote:

Originally Posted by Rookie Ab (Post 1161136)

Inner AEG barrels need to be modded ,and is a little tricky ;) ,I screwed two inners before I got a system figured out.

The threads on the lower are totally different than most, for the stock tube,because they use a brass inner buffer tube and a M4 style outer that slides over.

The AEG outer barrels just need a small notch cut and a small hole drilled and taped for a set screw.

Hey Jeff,the inner and outer are held together with a small set screw,located on the top center, just in front of the flange on the outer barrel.

If you get an AEG outer for the KJ,make sure it's the deeper chambered one or the 1 cm adjustable one.Or ;) you can drill it deeper like I did,on one of mine.

Can you give me examples of what you mean by deeper chambered? Can you give example of each please? Which of these are correct?
http://shop.ehobbyasia.com/element-1...m4-series.html
http://shop.ehobbyasia.com/gandp-10-...m4-series.html
http://shop.ehobbyasia.com/gandp-10-...a1-series.html
http://shop.ehobbyasia.com/gandp-10-...or-m4-aeg.html

P.S. Is ehobbyasia.com a reliable retail site?

Quote:

Originally Posted by beanie (Post 1450656)

http://www.airsoftcanada.com/showpos...&postcount=255

So that's to say G&P will fit whether its steel or aluminum, normal AEG or WA? They all have the same chamber? A little explanation would go a long way.

Whats everyone's thoughts on ehobbyasia.com? Do they have a good return policy/does customs confiscate parts (besides magazines)?

From what I understand they can be made to fit, but why don't you just contact KJW and ask them if you can buy one from them.

On a different note, ordered my NPAS last night from Amos. If any of you want to order parts for the KJW, talk to him. Great guy.

From what I've heard it can be a pain to communicate with KJW as well as long wait times. Also I want some different length barrels.

Does Amos have a website?

For the barrels, I looked closely at the pictures from my previous post and determined the non-WA "normal" AEG barrels are the proper ones. Is a steel barrel very hard to dremel compared to aluminum?

For the inner barrels contact t-hum on arnies airsoft, he's making them from madbull barrels.
You might want the bolt carrier extension too....

Quote:

Originally Posted by beanie (Post 1451226)

I don't have a website YET... I will hopefully soon :P

Quote:

Originally Posted by Pinard (Post 1403013)

Hey guys...I have the RAtech blue hop up rubber lying on my desk...and I'd like to install it in my M4...but I don't understand how to get to the hop up...last time I tried to figure out by myself something I scratched everything so I'm asking your help BEFORE I make a mistake :D

Any tips on where to get a blue version? I can only find a red and clear version.

I've got the blue ones lol

Are they a lot more consistent than the stock ones?

They're able to apply alot more pressure to the BB's and "hop it up" alot better :)

Alright, I'll test out the stock one in a week, the only game I was able to game it, ex owner had shimmed the rubber and even on zero setting the BB's would reach the stars...

Catastrophic failure today... :'( I shot 3 mags through on full auto, and about halfway through the third one the stock just blew off...
http://i281.photobucket.com/albums/k...5/bbdbb18a.jpg
http://i281.photobucket.com/albums/k...5/3b2e2773.jpg

Someone want to PM me where I can get a new plastic or metal one? :'(

Oh wow!
http://www.albertaairsoft.com/store/...d_product=1322

You can also ask Jeff @ capitalairsoft if he has a metal one.

Or actually, I have a spare black painted one lying around. I'll give it to you free if you pay for the shipping.