Really a great work Jimmy!
:cheers:

Thank you.

Few updates (of course) ;)

Invisio M3 with Invisio PTT:


http://www.jimmysjogren.se/wp-conten.../09/092003.jpg

http://www.jimmysjogren.se/wp-conten.../09/092004.jpg


'Donkey-dick' antenna, VHF and UHF for the CCT impression.

http://www.jimmysjogren.se/wp-conten...0/09/09121.jpg

CCT with this antenna:

http://www.jimmysjogren.se/wp-conten...withdonkey.jpg

All my antennas I have today:

http://www.jimmysjogren.se/wp-conten...0/09/09124.jpg

New real steel old gen Thales Broadband antenna:

http://www.jimmysjogren.se/wp-conten.../09/090912.jpg

Comparison between Spartan Broadband and real Thales Broadband antenna:

http://www.jimmysjogren.se/wp-conten...09/bbcomp1.jpg

http://www.jimmysjogren.se/wp-conten...09/bbcomp2.jpg

Wow Jimmy... that antenna is friggin huge!

Just saw that new product popping on RSOV:
http://rsov.com/index.php?target=pro...oduct_id=13013

Conker is this a replica ..if so it looks damm good

http://www.airsoftcanada.com/showthread.php?t=95595

there you go, conker and I will have 2 sample to test them in the next few weeks.

found the generation 4 generation four on this forum
http://dragonredairsoft.com/catalog/...roducts_id=165

does anyone has this version?

i'd avoid anything Dragonred over what happened with the gen3..

just my 2c

Unfortunately supporting PMR freqence in Europe is mission impossible. European user beware.

Sorry for the necropost

Just wondering if anyone else had luck making a PTT work for the Yaesu VX 7R like Jimmy did? I'm trying to make the 3 below items work together.

MSA Sordin
Nexus U94 PTT
Yaesu VX 7R


I also have a Yaesu THREADED/WATERPROOF cable to install in the Nexus PTT.

Also do I still need to change the MIC to a high Impedance?

Any help is greatly appreciated

Alternative to getting an AN/PRC-148 clone is to buy the PRC to XTS adapter. It will allow coonection to a Motorola XTS/Jedi radio. This radios can be found on ebay for $50 to $100. They are milspec radios and the MT/MTS have 64/128 ch.

I've got the Toy Soldier PRC-148 replica. Can anyone recommend a supplier for the speaker/microphone which I've seen for this radio?

regards,

Bob