Airsoft Canada
Page 3 of 3 12 3
Show 100 post(s) from this thread on one page

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Accessories Discussion (https://airsoftcanada.com/forumdisplay.php?f=25)
-   -   "CNC'd" Steel VLTOR F/BUIS. WARNING! (https://airsoftcanada.com/showthread.php?t=64836)

Lakonian August 8th, 2008 22:04
Quote:
Originally Posted by Ronan (Post 789475)
Its necessary on all guns. It stops the rail from turning or something like that. I had mine on my PTW.
Aww for fock's sake....

Time to reinstall.... :rolleyes: :p

Thanks Ronan.

Voodoo August 9th, 2008 12:13
you get what you pay for, ive got a few parts from here and i have been satisfied with half and the other half is WAY OFF THE MARK! Rail mounts that are a mm too small or over sized, metal body that aren't even strait! I prefer to buy quality the first time so i get KA or other brand names.

Do you buy your camo from SuperStore?

Lakonian August 9th, 2008 20:46
Quote:
Originally Posted by Voodoo (Post 789872)
you get what you pay for, ive got a few parts from here and i have been satisfied with half and the other half is WAY OFF THE MARK! Rail mounts that are a mm too small or over sized, metal body that aren't even strait! I prefer to buy quality the first time so i get KA or other brand names.

Do you buy your camo from SuperStore?
Very true.

Turns out I'm keeping the Vltor flip for spare parts (project I'm going to start building later).... We'll see how that floats.

Ronan August 10th, 2008 00:39
Quote:
Originally Posted by kos (Post 790220)
Very true.

Turns out I'm keeping the Vltor flip for spare parts (project I'm going to start building later).... We'll see how that floats.
Why didn't you get a KA, its dirt cheap and pretty nice.

Lakonian August 10th, 2008 01:34
Quote:
Originally Posted by Ronan (Post 790370)
Why didn't you get a KA, its dirt cheap and pretty nice.
Steel > zinc.

808 August 14th, 2008 13:43
Only if it fits.

Lakonian August 14th, 2008 23:10
http://img.photobucket.com/albums/v2...ment-1aspx.jpg
http://img.photobucket.com/albums/v2...nt-2aspx-1.jpg

LaRue still doesn't run straight... but it sure looks nice :p

Ronan August 14th, 2008 23:16
KOS word of advice. Once you start pimping an M4 your wallet will hate you...:D

Lakonian August 14th, 2008 23:32
RS upper on the way. My wallet disowned me two weeks ago. :p

Ronan August 15th, 2008 00:20
Quote:
Originally Posted by kos (Post 795139)
RS upper on the way. My wallet disowned me two weeks ago. :p
After i bought the Prime VLTOR lower and a MUR gen 1 upper my wallet left me.

Lakonian August 15th, 2008 00:40
Quote:
Originally Posted by Ronan (Post 795211)
After i bought the Prime VLTOR lower and a MUR gen 1 upper my wallet left me.
I was going to get a reinforced upper, but there's no need on a PTW. I'm saving that for my RRA ;)

Whenever that shit gets cleared, that is... :rolleyes:

Ronan August 15th, 2008 01:23
Quote:
Originally Posted by kos (Post 795257)
I was going to get a reinforced upper, but there's no need on a PTW. I'm saving that for my RRA ;)

Whenever that shit gets cleared, that is... :rolleyes:
One day... M170 cylinder:rolleyes:

mcguyver August 15th, 2008 02:47
Quote:
Originally Posted by kos (Post 795257)
I was going to get a reinforced upper, but there's no need on a PTW. I'm saving that for my RRA ;)

Whenever that shit gets cleared, that is... :rolleyes:
I gained 15 fps going from stock to a reinforced, forged Sun Devil Mfg. upper. And consistancy went from 5-7 fps to about 2. Nothing else was changed.

Ohers have reported similar gains.

Lakonian August 15th, 2008 12:02
Quote:
Originally Posted by mcguyver (Post 795441)
I gained 15 fps going from stock to a reinforced, forged Sun Devil Mfg. upper. And consistancy went from 5-7 fps to about 2. Nothing else was changed.

Ohers have reported similar gains.
From reinforced uppers? Does that not happen with mil-spec?


All times are GMT -4. The time now is 21:10.
Page 3 of 3 12 3
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.