Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Newbie Tank (https://airsoftcanada.com/forumdisplay.php?f=203)
-   -   SG 552 or SCAR (https://airsoftcanada.com/showthread.php?t=78898)

LUTNIT March 19th, 2009 21:40

I just did a quick search on redwolf and the Prometheus Aero cylinder head says AUG/Sig552, I didn't really look past that.

Corleone April 16th, 2009 22:36

I'd say get a Jing gong SIG 552, cause it's cheap and good, and because you WILL eventually have to up opening it, and replace parts. It's the nature of airsoft. Of course the VFC can last you a long time. A friend of mine has a VFC HK 416, but even that one had it's piston break after half a season (he's way trigger happy :D). As already mentioned that v2 will also break after a while, while the v3 gearbox in the SIG will last you a long, long time. As someone else also mentioned, get the MAG 100 capacity magazines. They sell for 18 USD a paid. I also found some great mag pouches that can hold a pair clipped together. Beware though, cause the nobs connecting the mags together aren't that strong. DO NOT clip more than two together! They just can't take the strain. I also "reinforced" them by placing some hard foam between the mags, so they wouldn't move and creak as much as they do without.

Now that bad news about the SIG from JG:
- It's a nightmare to disassemble/assemble! Of course I'm quite spoiled with my P90, but still it's a lot of fooling around until you've stripped it down to the gearbox. What can be done to remedy this? Get the new SIG 552 from ICS! It's so easy to open I get wet in my pants, but it also costs 300-ish USD+shipping, while the JG will only cost 72 USD at UNcompany.
- It shoots too hard. Mine peaks at 407 FPS! o.0 Sadly the FPS is VERY inconsistent. It's shooting anywhere from 370ish-407, but 380-390 more than other speeds.
- It can't hold big batteries, and if you're not handy at all, it won't fit a small size lipo either.
- Trigger burns down fast, but a mosfet will fix that, and what a ROF you get from that! ^_^

GSK88 April 17th, 2009 09:15

Quote:

Originally Posted by Corleone (Post 965077)
I'd say get a Jing gong SIG 552, cause it's cheap and good, and because you WILL eventually have to up opening it, and replace parts. It's the nature of airsoft. Of course the VFC can last you a long time. A friend of mine has a VFC HK 416, but even that one had it's piston break after half a season (he's way trigger happy :D). As already mentioned that v2 will also break after a while, while the v3 gearbox in the SIG will last you a long, long time. As someone else also mentioned, get the MAG 100 capacity magazines. They sell for 18 USD a paid. I also found some great mag pouches that can hold a pair clipped together. Beware though, cause the nobs connecting the mags together aren't that strong. DO NOT clip more than two together! They just can't take the strain. I also "reinforced" them by placing some hard foam between the mags, so they wouldn't move and creak as much as they do without.

Now that bad news about the SIG from JG:
- It's a nightmare to disassemble/assemble! Of course I'm quite spoiled with my P90, but still it's a lot of fooling around until you've stripped it down to the gearbox. What can be done to remedy this? Get the new SIG 552 from ICS! It's so easy to open I get wet in my pants, but it also costs 300-ish USD+shipping, while the JG will only cost 72 USD at UNcompany.
- It shoots too hard. Mine peaks at 407 FPS! o.0 Sadly the FPS is VERY inconsistent. It's shooting anywhere from 370ish-407, but 380-390 more than other speeds.
- It can't hold big batteries, and if you're not handy at all, it won't fit a small size lipo either.
- Trigger burns down fast, but a mosfet will fix that, and what a ROF you get from that! ^_^


Those prices would be a dream in Canada. A JG Sig 552 here would probably cost around $300 ish and that's considered a moderately cheap company. I remember hearing the new ICS Sig in country here would come in ~$700 CDN.

Corleone April 17th, 2009 09:38

Quote:

Originally Posted by GSK88 (Post 965399)
Those prices would be a dream in Canada. A JG Sig 552 here would probably cost around $300 ish and that's considered a moderately cheap company. I remember hearing the new ICS Sig in country here would come in ~$700 CDN.

Yeah it would probably be even worse over here. Norway's a really high cost country, but we just import the stuff ourselves and pay shipping + customs. Do you guys get high customs feed is you import yourself or?

Forgot to mention that the JG was 72 USD + shipping.

ujiro April 17th, 2009 09:54

We can't import ourselves. We can only important parts and accessories, not full guns. So we get hit with it way more expensive.

Corleone April 17th, 2009 10:12

Quote:

Originally Posted by ujiro (Post 965423)
We can't import ourselves. We can only important parts and accessories, not full guns. So we get hit with it way more expensive.

I guess you've all tried this before, but I'm curious; Can you guys import weapons if you send the upper in one package, and the lower in one?

ujiro April 17th, 2009 10:16

No sir. Lower receiver is restricted, it would get stopped at the border.

Corleone April 17th, 2009 10:35

Quote:

Originally Posted by ujiro (Post 965437)
No sir. Lower receiver is restricted, it would get stopped at the border.

Oh my! And I wanted to visit Canada at some point. Does that mean that I can forget visiting with my guns?

ujiro April 17th, 2009 10:39

Yep. Those will not make it through.

dragwindsor April 17th, 2009 14:00

I have 2 VFC SCARs, and I'm waiting on a 3rd.

'Nuff said?


All times are GMT -4. The time now is 22:10.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.