|
Or you can get one of the TROY ones,just slides on. I'v been using one for years with no prob. They can be a bit hard to find.
|
Tactical Link makes one that slides onto the buffer tube as well I'm currently using it and love it
|
I just ordered a TW5 a couple weeks ago !!! i cannot wait.
Quote:
|
order it from double tap? make sure get the motor mods, some extra mags and the black cylinder. if you have any question drop by TTAC on Friday
|
K so AEG stock into PTW stock;
G&P marine stock has a similar receiver end to an M16 full stock, so no modification was necessary to run wiring into the "buffer stub" I used a systema full stock buffer stub, turned it down (hobby lathe FTW), shaved the face of the marine stock, straightened it out and drilled/tapped/countersunk a 1/4" screw into the top of the buffer tube to prevent the stock from rotating. http://a6.sphotos.ak.fbcdn.net/hphot...18067419_n.jpg Mounted the board in "backwards" so all the wiring is on one end, just makes it cleaner in there. Still don't have my batteries yet.... http://a4.sphotos.ak.fbcdn.net/hphot...13076714_n.jpg And here's the nearly finished UNPAINTED product complete with the "locomotive" elcan specterDR 4x red dot. Still gotta mod and mount my MOE grip The reason for the tan stock, is because they were out of black, and because it's a high wear area, I'd rather have it fade to FDE than black. Also if you guys look up pictures, it looks distinctly khaki, but it's actually a very convincing flat dark earth. http://a1.sphotos.ak.fbcdn.net/hphot...13990083_n.jpg http://a7.sphotos.ak.fbcdn.net/hphot...59213681_n.jpg |
Sexy looking definitely a big change since the last time I saw it
|
PTW-4 mil/LE grade Full Auto
Real Steel EOTech 511/A65 Rev. F Daniel Defense 12.0 Omega X rail Magpul single point ambi sling mount (Before anyone says it I know... looks goofy with no back up sight and the blue LE grip. I'm working on it.) TW-5 Completely stock - just got it last night from Shrike Airsoft. http://i1097.photobucket.com/albums/...rTex/006-1.jpg Sorry about the bad photography guys the camera is new and I am very unskilled anyhow. |
Quote:
|
I have 9 TW5 mags and 7 PTW-4 mags but I plan on ordering another box of each. I love playing real cap but it's expensive...
|
|
Did you polish your clear lower? I can't even see it!
|
SSSSSSSSSSEEEEEEEEEEXXXXXXXX
with camera flash without camera flash closeup on pattern with camera flash http://a8.sphotos.ak.fbcdn.net/hphot...28414474_n.jpg http://a2.sphotos.ak.fbcdn.net/hphot...25933986_n.jpg http://a6.sphotos.ak.fbcdn.net/hphot...53789026_n.jpg |
Goddamn I'm posting a lot in here lol
Also did a water resistance mod Used lube-master electra coat, it's a spray that sets into a plastic film, fairly easy to work with after, and has pretty good control over thickness of the film. Specifically meant for water proofing electronic components, battery terminals, boards, and the like. Didn't spray the buffer tube board as I'm going to seal off the stock instead of the board. I hear they're more prone to overheating when sealed, and it's pretty easy to seal off my stock. And yes, the gun works fine right now lol masking off vital components http://a4.sphotos.ak.fbcdn.net/hphot...30059824_n.jpg wet spray http://a5.sphotos.ak.fbcdn.net/hphot...00513812_n.jpg dry spray http://a8.sphotos.ak.fbcdn.net/hphot...15645027_n.jpg final product, cut around the trigger switch with an exacto and just peeled the coating up. Comes off like scotch tape http://a6.sphotos.ak.fbcdn.net/hphot...91784895_n.jpg |
My first PTW :D
http://i1082.photobucket.com/albums/...7/IMGA0115.jpg |
|
| All times are GMT -4. The time now is 09:06. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.