Airsoft Canada - Good First Pistol?

Airsoft Canada (https://airsoftcanada.com/forums.php)

- Newbie Tank (https://airsoftcanada.com/forumdisplay.php?f=203)

- - Good First Pistol? (https://airsoftcanada.com/showthread.php?t=173884)

Just run the TM on duster during cold temps. Yes, CO2 would work better in the cold in general, but TM's are still going to be nicer than anything running CO2 during warm weather (when you do your most airsofting :P)

Quote:

Originally Posted by Kelseamac (Post 1959133)

How well would the TM G17 perform in 1-5°C, and if it doesn't work would a Co2 pistol perform better?

If you shoot slowly and you keep your mags in a warm area, such as inside your coat/BDU, it will be fine. Don't expect to be able to quickly dump a whole mag though, it will cool down too much and dump all the gas in one go. Your FPS/joules will also go down. CO2 is better in the cold, but it will eventually suffer from the cool down effect too. The best pistols in the cold are either non-blowback (NBB) pistols such as the TM MK23 or AEP pistols (non-blowback, electric, low power ~220fps). KJW has come out with a CO2 NBB MKII pistol, it should work very well in the cold. It has a hard trigger pull though.

http://www.kjworks.com.tw/productdetail.php?id=73

http://www.kjworks.com.tw/photo/13813109112.jpg

Which slide would be best compatible with the guarder frame, PGC or Guarder?

Ended up getting the TM, with:
PGC Slide Set
Guarder Frame
WE Mag
Some sorta serpa

And love it, so thanks for everybody's help :P

Pics if anyone cares: http://imgur.com/a/32ZfH