in reading this thread i have to say thanx you just saved me a shit load of cash. i'm glad i'm reading the threads before asking the same questions over again as a nooob it gets annoying when trying to find good info like this. so thanx again for great solid info

Outstanding Thread Sir.
Stock TM m733
after reading this thread a 380$ parts order has been boiled down to
1 spring guide, 1 Modify S100 spring (for around 370 fps) & 1 set of Version 2 gearbox Bushings (Modify 6mm Bearing Bushings), G&P AEG Grease Set & 1 set of 24 Shims (I remeber reading that shimming and properly Greasing your Gear box, Cylinder and Orings is a dam good idea)... 84$ from Duy plus shipping.. NICE
(compaired to my 486FPS VSR10 just under $400 (including shipping costs) in internal parts Wooof)
THANK YOU
THANK YOU
THANK YOU

PS PLus I have a SystemA 455mm 6.04 AEG (currently under going testing in the VSR) & a Promethius 603. 433mm I can drop in at no extra cost.

great read thanks.

valuable and very informative info here, if its your first aeg or a real gun head the advice , given here

Armoredshell

Dont you think this sticky should be updated ?
I think is a great post, but lots of things have changed since it was written almost 10 years ago.

And here I though Greylocks was back on the scene.

:)
 

Great post

increasing GBB recoil ???
 

Why the heck are these companies promoting recoil boost kits? Is it more fun to get more recoil and suffer accuracy?

I would prefer lower or no recoil on my GBB M4 like my AEG.

I am sure GBB makers can manufacture GBB guns to kick as hard as a real steel rifle and more. But shooting a plastic 6mm BB....

RA-TECH HOW TO INCREASE WE AK RECOIL POWER.mpg - YouTube

http://popularairsoft.com/news/how-i...b-recoil-power

When you say upgrading to a longer barrel could be complicated what do you mean? Because I went from a 350mm to a 550mm and just upgraded to a non ported cylinder, is there anything im missing?