Airsoft Canada - JG M4 S-System Opinionz

Page 5 of 5

Show 100 post(s) from this thread on one page

Airsoft Canada (https://airsoftcanada.com/forums.php)

- Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)

- - JG M4 S-System Opinionz (https://airsoftcanada.com/showthread.php?t=52798)

Savage Haggis

February 20th, 2008 21:13

Quote:

Originally Posted by NickPoole (Post 649351)

I just got my JG M4 S-SYSTEM .. i love it but was dissopointed to see my battery does not fit , there is no where to tuck away the stiff battery cords without messing up the placement of the battery , basically i just cannot close foregrip at all due to this , making my gun useless until i find a solution . Tips welcomed..

Find & mount a ANPEQ battery box to the right, or left side rail. This will incorporate your 8.4v mini bat, or better yet, a 9.6v mini bat or butterfly type battery.

Problem solved

Like this example, for instance...

http://www.michiganairsoft.szm.sk/pics/m4h.jpg

The battery box sits on top of the rail, in front of the RDS (Red Dot Scope) & behind the front steel sight, holding your battery.

No fucking about trying to get it to fit in the underside.

FYI, you can mount on any given rail on the front hand guard, what ever floats your boat.

jesster202

February 20th, 2008 22:37

if its an s system it should fit in the SIR the gun pictured above is a ris vs i own the m4 but made it into a s system and i did go to a peqbox because i got a larger battery but the stock battery should fit in the grip that has two screws on either side that comes off.

Savage Haggis

February 20th, 2008 22:56

Twas merely a ANPEQ example - not the AEG.

But thanks any ways... :D

NickPoole

February 20th, 2008 23:03

The battery fits , but the wiring does not tuck away to the sides , its difficult to explain why but it doesnt and it makes it impossible to close.

Perhaps a ANPEQ is the way to go , the battery connector in my gun is very short though and there is no where it can fit thru on the forgrip to connect to a ANPEQ..

Gah this is quite frusterating, i just wanted to use my first gun without troubles.. now i need to drop more money to get the battery to fit.

Savage Haggis

February 20th, 2008 23:16

If you are adventurous (read:frustrated) you can do what I did - removed the front grip (upper & lower), & move the wiring, fuse & connector to what better suits your immediate needs.

I discovered the same problem straight out of the box, however, being Scottish & not one to back away from a problem, I immediately set about removing the upper & lower, snipped the little black zap straps holding the wiring in place & tried several different variations of where it would, might & wouldn't work for me, finally settling on the ANPEQ (Because the 9.6V rocks that little gun!).

Thus why I found it far easier to throw a ANPEQ on mine.

NickPoole

February 20th, 2008 23:35

I really dont want to tamper with wiring , ect. I really dont want to mess anything up... but now i want a PEQ. Maybe I should see if any locals can help me out in re-jigging this.

jesster202

February 20th, 2008 23:38

oh savage didn mean that though he was saying his was not fitting and didnt want him to get confuzzeled lol as i ddi once when i was a little nub and didnt even know how to plug in a battery lol.

All times are GMT -4. The time now is 02:34.

Page 5 of 5

Show 100 post(s) from this thread on one page