Airsoft Canada
Page 50 of 66 « First 40414243444546474849 50 51525354555657585960 Last »
Show 100 post(s) from this thread on one page

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)
-   -   airsoft WW2 releases 2011+ (formerly ICS M1 and Grease gun?) (https://airsoftcanada.com/showthread.php?t=117984)

Fuji March 6th, 2013 12:32
Quote:
Originally Posted by Brian McIlmoyle (Post 1769166)
does anyone know anything about the k98 springer that recently came out.. like.. WHERE TO GET ONE?
PM sent!

Drunk_Albertan March 6th, 2013 13:41
Fuji, if you have a line on some can you pm me the info too possibly??

Strelok March 6th, 2013 13:48
Same here... Very interested!

COL.TIKER March 6th, 2013 14:21
I find it weird that only 1 retailer carries them..

pounce_the_jaguar March 6th, 2013 18:44
Quote:
Originally Posted by Strelok (Post 1769141)
Darn, you beat me then :P.

I'm thinking of filing down the contact part of the striker valve to see if that will affect it. Thoughts?
We all got nagants, that's all that matters in the end.

It's worth a shot but it's permanent so maybe hold off. I was thinking of cracking it open and seeing if I can't install a weaker hammer spring. That shouldn't vent as much gas. To bad there isn't a hop up on the thing.

Drakker March 6th, 2013 19:57
Quote:
Originally Posted by pounce_the_jaguar (Post 1769427)
We all got nagants, that's all that matters in the end.

It's worth a shot but it's permanent so maybe hold off. I was thinking of cracking it open and seeing if I can't install a weaker hammer spring. That shouldn't vent as much gas. To bad there isn't a hop up on the thing.
Problem is, there isn't a hammer spring according to the diagram on the box. So either the diagram is missing a part, or the spring that holds the trigger also somehow pushes the hammer.

If you look at the valve diagram, it could be possible to change the valve spring for a stiffer or slightly longer one. Or maybe putting some shims in the valve assembly near part 7-10.

pounce_the_jaguar March 6th, 2013 21:06
Quote:
Originally Posted by Drakker (Post 1769458)
Problem is, there isn't a hammer spring according to the diagram on the box. So either the diagram is missing a part, or the spring that holds the trigger also somehow pushes the hammer.

If you look at the valve diagram, it could be possible to change the valve spring for a stiffer or slightly longer one. Or maybe putting some shims in the valve assembly near part 7-10.
I see what your saying now that I'm looking at the diagram. I'll try to find some shims.

COL.TIKER March 8th, 2013 16:09
who has coverage of IWA2013? I want to see the pictures.

666 March 8th, 2013 17:21
A little bit off topic but Izhmash made AK74 AEG should be making an appearance at IWA2013 as well. Seeing some coverage from there would be nice.

Drunk_Albertan March 8th, 2013 19:23
Yeah I'd like to have a look at that MG 34.

Krieg March 8th, 2013 19:29
Quote:
Originally Posted by 666 (Post 1770307)
A little bit off topic but Izhmash made AK74 AEG should be making an appearance at IWA2013 as well. Seeing some coverage from there would be nice.

Are you joking? Izhmash making an airsoft AK? That would be fantastic!

COL.TIKER March 8th, 2013 19:53
Quote:
Originally Posted by Krieg (Post 1770341)
Are you joking? Izhmash making an airsoft AK? That would be fantastic!
Hey, since you are in Europe anyways, why not just take a drive over there and snap some pictures for us? lol

666 March 8th, 2013 21:40
Quote:
Originally Posted by Krieg (Post 1770341)
Are you joking? Izhmash making an airsoft AK? That would be fantastic!
Yup... I've seen talks about it on Russian gun boards for months now, just saw this post few days ago, it says IZ AK will be introduced on IWA2013.
AK74M версия Airsoft от НПО "Ижмаш" - YouTube
According to this video they are planing to make a whole line up of replicas.

COL.TIKER March 9th, 2013 22:15
Found some pics of IWA 2013, but I have no idea if these are airsoft or real steel.
https://fbcdn-sphotos-d-a.akamaihd.n...58186880_n.jpg

https://fbcdn-sphotos-d-a.akamaihd.n...60164221_n.jpg

This should be real sword i think
https://fbcdn-sphotos-g-a.akamaihd.n...07295706_n.jpg

wtf
https://fbcdn-sphotos-c-a.akamaihd.n...95875544_n.jpg

https://fbcdn-sphotos-f-a.akamaihd.n...00714412_n.jpg

haha
https://fbcdn-sphotos-d-a.akamaihd.n...32452609_n.jpg

oh look, red dot on the MP44, i want one
https://fbcdn-sphotos-c-a.akamaihd.n...03366617_n.jpg


OH YAY! found the MG34
"Next, RedWolf showed me the working model of an MG34. The MG34 is a limited edition replica and only a few hundred was produced. I think I was the only one who was interested how the gearbox looks like so here it is. The magazine is connected to the body via a BB feeder tube. And the sound activated motorized high capacity magazine will help you spray the area if you are strong enough to carry it all day. It's made of steel and wood, weighs accordingly."

http://www.popularairsoft.com/files/...f_rwl_mg34.jpg
http://www.popularairsoft.com/files/...wl_mg34_02.jpg
http://www.popularairsoft.com/files/...wl_mg34_03.jpg
http://www.popularairsoft.com/files/...wl_mg34_05.jpg


and these, apparently SRC
http://www.popularairsoft.com/files/...ay1_SRC_02.jpg

R.I.T.Z March 9th, 2013 22:23
Quote:
Originally Posted by COL.TIKER (Post 1770644)
I want those!


Anybody know what pouches fit the ICS Garand mags?


All times are GMT -4. The time now is 17:47.
Page 50 of 66 « First 40414243444546474849 50 51525354555657585960 Last »
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.