Airsoft Canada
Page 6 of 10 12345 6 78910
Show 100 post(s) from this thread on one page

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Media (https://airsoftcanada.com/forumdisplay.php?f=30)
-   -   Magpul custom guns (https://airsoftcanada.com/showthread.php?t=97811)

spartan117 February 21st, 2010 01:54
http://img19.imageshack.us/img19/135/dsc01284i.jpg

http://img714.imageshack.us/img714/4092/dsc01276pm.jpg

MilanWG February 25th, 2010 12:12
Magpul Made in Canada
 
The Unfair Advantage

http://i347.photobucket.com/albums/p441/milanwg/m4A.jpg
http://i347.photobucket.com/albums/p441/milanwg/m4B.jpg
http://i347.photobucket.com/albums/p441/milanwg/m4C.jpg
http://i347.photobucket.com/albums/p441/milanwg/m4D.jpg

Magpul ASAP
Magpul MIAD
Magpul Trigger Guard
Magpul AFG
Magpul PMags

Donster February 25th, 2010 12:14
Quote:
Originally Posted by spartan117 (Post 1168974)
how come your handguard looks different from the other Magpul handguards? it looks "thicker" or something.

spartan117 February 25th, 2010 15:16
Quote:
Originally Posted by Donster (Post 1173083)
how come your handguard looks different from the other Magpul handguards? it looks "thicker" or something.
Well for one thing i have added the ergo polymer rails.

Donster February 25th, 2010 15:34
Quote:
Originally Posted by spartan117 (Post 1173204)
Well for one thing i have added the ergo polymer rails.
ah thats what im looking at then.

thanks for the info :)

grzechotnik February 26th, 2010 13:24
Is a surefire light spartan117? Which model is that? Its look very nice.

StrikeFreedom February 26th, 2010 19:15
Quote:
Originally Posted by Grattoj2 (Post 1168896)
I just got my MOE foregrip in the mail. Did you have to do any sanding to yours to have your triangle sight fit? It seems like mine is about a millimeter too far forward to get the retaining pins to go back in.
No sanding needed, the MOE hand guard slides in perfectly.

Quote:
Originally Posted by spartan117 (Post 1173204)
Well for one thing i have added the ergo polymer rails.
Just curious, as I have the same hand guard, but why put on the rails when you don't use them? I guess you have different setups?

spartan117 March 28th, 2010 03:40
Quote:
Originally Posted by grzechotnik (Post 1173909)
Is a surefire light spartan117? Which model is that? Its look very nice.
Its one of Huang's surefire M962 flashlight replicas. :D

colazel April 13th, 2010 20:45
Here's my last aeg

Magpul Noveske M4

http://www.saguenayairsoft.com/bleek/BBR2010%20027.jpg

http://www.saguenayairsoft.com/bleek/BBR2010%20028.jpg

spartan117 April 13th, 2010 21:17
Quote:
Originally Posted by colazel (Post 1211164)
How did you get the dust cover to close? Mine is stays open.

Boyso April 13th, 2010 21:31
Switch the spring. If yours is holding the cover open, switch it back so it keeps it closed.

spartan117 April 13th, 2010 21:42
Quote:
Originally Posted by LastSpartan (Post 1211195)
Switch the spring. If yours is holding the cover open, switch it back so it keeps it closed.
I dun think so. The dust cover has a really huge locking pin on it.

Boyso April 13th, 2010 21:46
Must depend of the brand of the gun.

Nothing a dremel can't fix right? :P

ThunderCactus April 14th, 2010 00:15
What magpul did was put a real steel, or GBBR type ejection port on the gun, so the tab is physically too big for it to shut, you'd have to break the tab off or just buy an ejection port cover made for airsoft.

colazel April 14th, 2010 06:45
i used the dust cover on a G&G aeg


All times are GMT -4. The time now is 05:39.
Page 6 of 10 12345 6 78910
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.