Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Gear Discussion (https://airsoftcanada.com/forumdisplay.php?f=26)
-   -   *NOW UPDATED SEPT 23* Looking for setup assistance. (https://airsoftcanada.com/showthread.php?t=106605)

MrEvolution June 26th, 2010 00:19

*NOW UPDATED SEPT 23* Looking for setup assistance.
 
SEE LATEST POST FOR NEW QUERIES


Hello gents.

Below is my current rig:

http://img.photobucket.com/albums/v4...n/IMG_1387.jpg

(Going to swap the Pmags to the left side and those GI mags where the Pmags were, I feed from left to right).

I have my pistol here:

http://img.photobucket.com/albums/v4...3/_DSC2963.jpg

(This is lacking the magazines in the open space as it was before my rig's current setup)

I'm looking to possibly move my pistol mags to a belt (Molle battle belt?) for a second line with an IFAK and Dump pouch, unless you guys can suggest a better use of molle-estate.

Thanks

-Evo

Vince June 26th, 2010 00:39

So much mags...

No comms?
No utility?

I'd def move the pistol mags on a belt, take off the left mag pouch and replace it by either a medical pouch (EI upright for exemple) or canteen pouch. I'd even remove the 4th mag pouch for a radio pouch.

Even when skirmishing I rarely go through 6 real-caps

My current config on my CB RRV (from left to right) is as follow:

Canteen pouch
3 single mag pouch
MBITR pouch
Medical upright pouch
Admin on the bib
Frag on the right shoulder strap

MrEvolution June 26th, 2010 14:17

Used to look like this a long time ago

http://img.photobucket.com/albums/v4...n/S5003554.jpg

http://img.photobucket.com/albums/v4...SC1310copy.jpg

Im aiming to eventually get a radio pouch (for a puxing) and stick that someplace as well.

FOX_111 June 26th, 2010 14:24

I'd go with a belt for the pistol mags. If your pistol still interfere with your second line, you could use a drop leg and have it ride as high as possible, so your pistol handle is flush with your belt.

OR

Use shingles mag pouches and strap your pistol mag pouch on them. Your keep it one your reaction/support hand side, so your rifle don't hang on them when you transition.

huntingbuddy June 26th, 2010 18:11

Quote:

Originally Posted by MrEvolution (Post 1262408)
Used to look like this a long time ago

http://img.photobucket.com/albums/v4...n/S5003554.jpg

http://img.photobucket.com/albums/v4...SC1310copy.jpg

Im aiming to eventually get a radio pouch (for a puxing) and stick that someplace as well.

I love the Bill O'Reilly Quote. What a weird patch. Don't quite understand the other one.

MrEvolution July 5th, 2010 23:51

OK, so I have decided to move my pistol mags to my belt and have re-arranged my primary mags and IFAK. Looking at a Battle/MOLLE belt (The TAG one looks decent and in stock).

Question: Can I use my serpa holster with the paddle mount with this belt or is the fabric too wide?



Huntingbuddy:
The other patch (SUPRISE COCK FAGS!) is from Team America: World Police

13Fido13 July 6th, 2010 00:39

The fabric is probably too wide. I'd recommend using a drop leg or getting the MOLLE adapter for the serpa. I've got both and enjoy both setups for light gaming.

skalnok July 6th, 2010 01:01

that is basically my dream set-up for a vest.

might i ask how much it was/ where you got it?

MrEvolution July 19th, 2010 23:50

Received an ATS War Belt (very comfortable) and a TAG Riggers Belt (perhaps should have sprung for the suspenders as well)
from left -> right
2x pistol mags
2x Primary mags (might remove these to free up space for knife)
(most likely)dump pouch
Serpa + molle mount on right hip.

Going to have Primary mags on 2nd line on left, IFAK on far right, possibly radio to the left of the IFAK.

Pictures to come when everything is squared away.

Suggestions and Ideas welcome.

Chingyul July 20th, 2010 01:24

Sounds similar to what I plan on setting up, belt wise.
Swap the SERPA for a safariland (on either a single leg strap or the UBL).

Still using the RRV (is it?) as your 2nd line?
I'm looking for a split front chest rig that will fit me (30" waist, 36" chest).
Apparently the 2 piece MAV is too big.

MrEvolution July 26th, 2010 21:08

http://img.photobucket.com/albums/v4...n/IMG_1390.jpg

http://img.photobucket.com/albums/v4...n/IMG_1391.jpg

Looking for a knife sheath for displayed Cold steel knife. A friend showed me the Blackwater Gear sheath that you can mount molle pouches on top of, but it looks discontinued. I would like to put it under the Medic pouch,or on the belt.
Any blade gear-dos out there?

Planning to put a radio pouch in that open space.

13Fido13 July 27th, 2010 02:45

I have condor molle faced m4 mag pouches. The ones with the bungie on top of them. I have them stacked in a brick pattern on my vest. I then jam the knife between the pouches... Hold it nice and tight, but I can still get it out quick.

For example below. Where [==] is the Mag pouch and | is the knife. This is how you would look down on your setup and the **'s are where your chest is. The .'s are place holders so I don't break the internets.......

...[==][==][==]....
[==]|[==][==][==]
**************

Does that make sense?

MrEvolution July 27th, 2010 18:49

Good idea Fido, tried it here, didnt work out so well, haha.

13Fido13 July 28th, 2010 00:26

What about stuffing it in beside your mags inside the pouch. Only problem with that is when you remove the mags....

What about behind your medic pouch....

The Chad July 28th, 2010 00:51

I put my knife handle facing forward on my shoulder under the velcro. I have a Maritime CIRAS though, I can't tell if you have those shoulder pads or not.

sarosh July 28th, 2010 00:57

evo a lot of guys use knives here now if you choose to come out ever and play take a look around everyones got them in different positions, i found a real knife sheath and attacked it to my right strap on my shoulder

MrEvolution July 28th, 2010 08:56

Quote:

Originally Posted by sarosh (Post 1284365)
if you choose to come out ever and play

Im going to shoot you alot.........if my job ever lets me leave... :)

MrEvolution September 24th, 2010 00:58

Rig updated:

R-L while wearing:
Utility/IFAK
mags
HSGI Blowout pouch used as radio pouch. Fits Puxing 777 perfect, and the snap loop at top holds my knife perfect as well.


Belt:
1911 w SERPA
Buckle
2x pistol mag
2x single mag
Dump pouch towards rear.

QUESTION:
Got some HSGI Suspenders for the belt...I ordered my size as show in 'how to measure' on their site. Received them today....they are massive and now my belt hangs mid thigh.

Anyone have experience with these suspenders and know how to adjust them?

Thank you!

MrEvolution September 24th, 2010 19:14

Scratch previous. Turns out the suspenders are defective and werent made correctly.

SniperSam September 24th, 2010 19:33

Quote:

Originally Posted by huntingbuddy (Post 1262497)
I love the Bill O'Reilly Quote. What a weird patch. Don't quite understand the other one.

Pork eating crusaders? Muslims dont eat pork and white people led the Crusades. and many people are starting to see the Middle East conflict as a second Crusade...this is poking fun at that


All times are GMT -4. The time now is 05:18.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.