Cold Wire Connector
 

I should prob run a new wire but anyways my connector on my cold wire (-) Or black wire to the motor is busted off.. Where can i get a replacement.. Hell id even pay someone to actually rewire my gun if i have to.. Any help would be great.. Thanx...

Airsoftparts or You can sometimes find them at canadian tire

i'm hitting up active surplus gonna buy wire and re do everything manually..

send me the gun and I'll rewire it for you.

I bought like 6 feet of wire and some connectors cost me like a buck... I'm gonna grab my soldering from work and do it prob on Monday but i'll prep it all tomorrow. I got a little bit of a thicker wire though.. I actually brought in my gearbox into the store so they could get me something that could take the power and he recommended this cable to me it's a tiny bit thicker but it will all fit... If it doesn't work then i'll pop by or something

I can't get it to work i just want to beat the thing..

So maybe get a gundoc to do it?

Dood at this point i just want to give up on airsoft. The maintenance is retarded.. I get the gun back together and nothing just stalls doesn't fire i take it apart a thousand times and the same result doesn't fire just stalls.. I shim it properly and the same thing it just stalls. Ive gamed the thing like 4 times.. I squeeze the rigger the wires heat up.. like how bloody hard is it to make the damn thing work it isn;t that complicated it's just the dumbest thing in the world.. i've had enough of it i have invested so much damn money on a gun that just breaks..

Gundoc. Get a professional to do it, get some basic reliability upgrades, and dont worry.

Once you get a gun that works for you, you wont regret it.

i've had this thing for a year now.. I rewired it i don;t get it why wont it pull the spring back? It had no prob before and it's only a 110.. The motor still works ive tested it but it just wont engage.. Ive taken it apart and gotten it to work before but now it just wont and i'm F@ckin tired of it i want to whip the gearbox across the room

get it to a gundoc. a professional one.

The first problem was opening it yourself. I'm not saying that to insult you, but its just the way things go usually. It works fine till you open it up, then after that it's never the same.

everyone thinks they know how to build a gearbox but to build it reliably is very different. it takes a lot of hard work and knowledge. this is why it cost a bit for a gundoc service.

How much give me a ball park figure?

Everyone has different rates. Talk to a local gundoc.

Already been done

Black or (-) is your "hot" btw.. unless your conventional flow theroy..

If you really want your gun re-wired.... but from the sounds of the issue you have, you just need to crimp on a new connector, remember to tin the wire before you crimp it!

I'm going to replace some parts upgrade and get them ready and give it all to the tech to do it all and then i'll leave it alone..

That's usually the best bet, if you have parts that you wish to have put into it, collect them, but leave them in the packaging. Once you have all the upgrades that you think you'll want then pass the gun along to an EXPERIENCED gun doc..

In fact I would recommend talking to the Gun doc you wish to pass the gun along too, about the upgrades you wish to buy, as some aftermarket parts, dont like each other. this usually happens if you start to mix and match brands..

Yeah i talked to on already he's gonna link me up.. I asked a few things he suggested some things so i will go with those... I mean i have some stuff thats already good that i got before in great condition i'm just gonna get more and then give it to him... Guess it wont really be a G&G anymore everything internally will be something else besides the tripper the bearings and the actual gear box but internally it's all gonna be other shit.. The external will only be G&G lol.. Most of the stuff i have is Modify
..