my D-90-H =jammed
 

Yes, hint my name, I'm a n00b in the airsoft world. I was shooting my D-90-H AEG and it got jammed. theres maybe 4 BBs in the barrel. The gun came with a long pink tube thing, and the instructions were translated from Japanese so it makes NO sense!

"When the gun tube stem, use the plastics stick stop the thing pure drop."

THATS WHAT IT SAYS!!! And I read on other forums that you just push out the BBs with the rod. So I just shove the rod down the barrel and push it out? I look really well, but I don't see a "back" where the BB can fall out of.

Help would be great :nod:

Use the rod to push the BBs back out from where they were loaded. There must be a hole for them to be loaded from the mag, so remove the mag and use that same hole only backwards.

The rod they gave you should have a slanted tip. When you push the rod down the barrel, it should be slanted so that it will push the bb's down. The bb's will fall out of the hole where the mag inserts the bbs, so take out your mag first.

EDIT: Well, I was beat. ^^^^^^

Its not slanted, its just a tube. Flat on both ends. Where the BBs enter the barrel, is on top, so do i Flip it?

No, you keep pushing until they go out on their own accord. Of course you turn it upside down. Let gravity do your work.

Its also wierd. Its almost like a cap, it opens and closes when you shoot it. I don't know how to keep it open so the BBs can drop.

I used to have a gun like that. Try shooting it on full auto mode but be really light with your finger. just give it a tap so it stops mid cycle. Some times that works.

EDIT: And is it a TM or a CYMA gun?

With a name like D-90-H, you know its not a TM. Sounds like a cheap piece of cr..... ummm, "budget" gun :innocent:

I don't know what TM and CYMA is, but this is the gun I have.

The Well D90-H.
http://www.laroysairsoft.com/i/D90H/d90hs_copy.jpg
Thats EXACTLY what my gun came it, that box and everything in the box.
See that pink tube in the second pic?

In airsoft as with most things... you get what you pay for.

http://www.hotspotairsoft.com/hsasto...roducts_id/405

yeah, as honest john said... "YOU GET WHAT YOU PAY FOR".

Just because its cheap doesn't mean that you can't unclog it. This is going nowhere

Don't use cheap BBs. There's your fix.

Now how hard could it be to get some BBs out of your barrel?

I already explained it. The part that shoots the BBs opens to get another BB into the barrel, then when it closes, it shoots the BB, and repeats. (very fast, obviously.) I can't keep the "cover" open.

It sounds like that you're seeing is your nozzle, actually. It pushes a new bb into place each time one is fired. However, the resting position of the nozzle should be pulled back, not pushed forward. Sounds like Well may have cheaped out on their gearbox setup.

You should try combinations of full auto or semi (in particular) to try and get the nozzle back. Failing that... take out the gearbox?

Not to sound like a dick, but don't buy a $40 gun again, you may find youself spending hours of repair time like this for the rest of the life of that gun (which admittedly may be short... all the more reason to save up for a higher end model).

I'll sound like a dick then; you bought a piece of crap. It failed because it's a piece of crap. It's what? $36 US?

Right now your choices are; try to fix it by shoving that rod down the barrel, buy another one and take a chance again, or buy a far better gun than that and keep this one as a display piece.

Good brands to look for; Marui, ICS, CA. That's about it.

If the Well is a clone to the TM P90, your best bet is to remove the front end before attempting to unclog the barrel. With the front group removed, the mechbox nozzle wouldn't block the bb passage.

If you don't have a clearing rod, you're going to have to make one. Try cutting a wire coat hangar and bend the wire stock straight. Wrap the tip in several layers of tape so it doesn't scratch the inside of the barrel and use the makeshift clearing rod to push the bbs out.

Stick to better grade pellets which are less likely to jam. Low grade pellets may mostly be round, but there are a few obround or very badly shaped pellets which may jam your barrel and have additional rounds packed in.

Is it just me, or should this have been trashed long ago?

no.... whats wrong?

HE HAD A QUESTION.

...about a gun that costs as much as a TM lowcap and is not worth fixing.

Hit it with a rock

were would you get a WELL D-90-H gun like that in canada?

check some dumpsters

no

HAHAHAHA
nice

You should know better than to even ask that by now. Really.