My TM G36K RAS
 

I just bought the Classic Army set for my TM G36K project and I'm very impressed of the quality on how it was made. The best barrel set I've seen and even the RAS Handguard looks like the real Knight's Armament RAS. I think it looks even better then the Army Codes $195 G36K barrel set and the CA G36K RAS with barrel set cost only $124.

Classic Army G36K RAS set.
http://www.classicarmy.com/photo/700_pi2_A155M-1_b1.jpg


The Nitro.Vo RAS handguard don't even comes close to the CA RAS.

The one on the right is the CA RAS.
http://i60.photobucket.com/albums/h4...6K-CA-RAS3.jpg


The barrel set fits nice in the TM body. One thing you can't use is the 247mm internal barrel so I bought the M4A1 363mm barrel and now it fits great to the flash hider.

http://i60.photobucket.com/albums/h4...6K-CA-RAS2.jpg

I'm using the stock wiring with the fuse and I didn't want the RAS to cut the wires so I had to fit all the wires in the body.

http://i60.photobucket.com/albums/h4...36K-CA-RAS.jpg
http://i60.photobucket.com/albums/h4...6K-CA-RAS1.jpg

The battery fits good with the RAS.
http://i60.photobucket.com/albums/h4...6K-CA-RAS5.jpg
http://i60.photobucket.com/albums/h4...6K-CA-RAS4.jpg

I also added the G&P rail and G&P G36K stock. just finished my G36K project. :D http://i60.photobucket.com/albums/h4...8/TM-G36K6.jpg
http://i60.photobucket.com/albums/h4.../TM-G36K-8.jpg
http://i60.photobucket.com/albums/h4.../TM-G36K-7.jpg

nice work but i think you should paint it to cover up the 2 maybe 3 diffenernt kindas of black used but thats me.

That looks awesome. Big gun :lol:

i picked one up last month for the CA36K, works great, except you need a 3mm hex just to change batteries... : (

http://i52.photobucket.com/albums/g4...3/HPIM0705.jpg

Beautiful.

Quick question while on the subject of the H&K G36... any opinions on the TM vs. CA battle? I heard that the internals on the CA are much better... but I have always been a fan of TM.

Any inputs?

Btw, Amazing KG3 - I too am a huge H&K fan brother! =)

Cheers,
KaOz.

The CA one is far superior with 7mm busings and 330 FPS, as well as a resin body while the TM one is only ABS. However the TM one has trademarks. Also the TM ones only come in the C model, while CA supplies C, K and E.

Hmmm... I noticed there is about $100 difference between the CA and the TM model.

So in other words, the CA comes already modified and shooting roughly 50+fps, correct?

See, I like the C for CQB situations... and well, being a purist and all, I like that it comes with trademarks. I might fork over another $300-400 to upgrade the internals so it shoots 350fps and be happy with it. In the end, isn't part of the fun modifying things?

Thanks for your input!

Cheers,
KaOz.

this is a good point, except if your a purist, i think your gonna want to get the poly-resin body on the CA. Its really a choice you cant make until youve seen both. I went with the TM first because i trust their build and reliability, and i have heard bad things about CA, however i really wanted a K where all the blacks were the same color so i bought a CA36K after. I will always have a CA36 in my armory now.

On a side note, TM g36 locaps are the best, CA ones suck. KA are the cheapest.

http://www.geocities.com/staceykondla/G36SDjpg2.jpg

I've added more since then, Its kinda like the m4 sd with the imbeded scilencer, anyhow something different. Sorry about the camera phone pic...Pretty bad:(

im glad you added a full length stock, really completes it.

I've got the PDC RAS Conversion Kit for about a year and I must say that it's awesome. Here's a picture I just took with Amazing KG3's G36E barrel I bought from him a while ago.

http://i53.photobucket.com/albums/g4...S/IMG_1618.jpg

More pictures, click here.

holy shit, crazy stuff

how easy does the paint stick to the RAS?

It holds alright, I'm pretty sure spray paint would make a better job though. By the way, it was Batman's gun so all the credits goes to him. I just paid big money and put a barrel on it. ;)

I think I'm going to paint it back, maybe black or something.

Nice stuff Firestorm. Its hard to tell in the pictures but what colour is the paint. Is it more OD or Tan? If you get a chance you should take some pictures outdoors. I dont know for some reason I like it with the shorter barrel over a long barrel. Would look really KSK with a short barrel and a M4 flashhidder on it too.

http://img40.imageshack.us/img40/9152/g369ie.jpg
http://img148.imageshack.us/img148/1739/21ta2.jpg

10.8v battery on it so I have a very ugly stock. I usually end up putting it on the side instead of the bottom of the stock. Paint on the RAS is solid as rock, I would highly recommend Krylon Camo Paint.

-Daes

Nice RAS set up!

I don't have my RAS set up anymore. I now made my G36 to a AG36 now. :cool:

Here's some pictures I took. I love it!

http://i60.photobucket.com/albums/h4...08/TM-AG36.jpg
http://i60.photobucket.com/albums/h4...8/TM-AG36b.jpg
http://i60.photobucket.com/albums/h4...8/TM-AG36d.jpg

i always wanted an Ag36 but i felt it took away from the silencer. Kind of a contradiction...

very nice.

looks great guys, really like Deas RAS Great gun man! :)

I know a lot of times people say "Hey, nice gun." or "That's sexy" or utter drunken slurs...but in all seriousness: THAT IS LUDICROUSLY SEXY

Wow those are all nice so far, all I have is a stock CA36k with the long RIS rails and vert front grip:

http://68.147.205.84/pics/DSCN2353.JPG

btw, I'm thinking of getting a G36C top rail so I can add a better scope for outdoor (thats the only place I can use it, since in Calgary your gun has to shoot under 320 FPS for indoor games)...

What heck.
Here's my set-up.....http://picasaweb.google.com/hunter.mike/CA36K

mmmmm elcan how much and where did the elcan come from??

Sadly it's not a real one. It's the Classic Army replica. But I got it for a sweet deal from Vanguard Airsoft out of HK. Paid $114 US shipping included for it. Brand new. I think they even have a few left.

http://cgi.ebay.com/NIB-Classic-Army...QQcmdZViewItem

I'm getting a bit of grief from the guys out here, b/c an Elcan "don't look right" on a G36. I'll admit it's frggin huge...but me likes...

thats right, EOtechs look better. lol >: )

Eotech...blah....boring.... :p

I also order an Aimpoint (I know not original) and a flashlight and mount.
Keep hitting that link as I'll be updating the pics once the stuff arrives.

I gotta say with all the stuff on the gun it's a heavy SOB. But me likes....

I really want a G36, but I'm sketchy about the body cracking on me... how strong is that "glass fiber" crap that CA uses? Is it as strong as say... a fiberglass bonnet (car hood) ?

im freaking jealous of all your g36 lol. They are all awesome. Should be ordering one in 3-4 weeks from (....sigh....) buyairsoft.ca .

i want to mount a ELCAN on my G3 when all is said and done.

the fiber resin body is extremely tough. It will endure alot but is prone to cracking if you over tighten screws. If you look after yor gun like sane person you should have no problems.

ras metal?
 

i'm trying to find a good metal foregrip for the g36c...

your setup looks great, is it abs or metal?

thanks!

All these RAS are metal.

My CA36K RAS looks exactly like KG3's... Oh wait, your gun belongs to me now! muahaha! I'm so glad I bought it man. Your pictures are awesome. :P

One question though, how come the battery wires are so short? I need to remove the magwell everytime I wanna unplug the battery.

Finally, wolfman, that silencer looks amazing. which one is it? I really want one like that.

hahah I know now ;) STAR knows how to do business.

accidently tore the second stage wiring. Most AEGs have wires from the mechbox to a connector that goes to another connector to the battery. So, meh. Im sure you could fins one if you needed to.

The G36K with the RAS looks great!!
I am building a similar one now.

My g36
http://i105.photobucket.com/albums/m...rswebbtext.jpg