Kraken ak47
 

What cell type does this gun use for the battery. I cannot seem to find anything about it so I am asking you guys.

That would be Sub C battery usually set up in a 8.4V mini format.

I have an 8cell intellect 1400mah battery from my r/c would that work?
I need to reconfigure the pack first to fit if it does.

it looks like these

http://www.flyelectric.com/images/IB-packs.jpg

I don't see why it wouldn't, although 9.6v would be pushing it harder then a 7 cell.

The battery that came with my Kraken is made up of seven 4/5C cells if I remember correctly.

The top is a 9.6V and the bottom is an 8.4V I dont see why they should not work.

would this wreck my Cyma CM028/kraken

FIREFOX 11.1V 1300mAh Li-ion AK Type Battery

http://cgi.ebay.ca/Firefox-11-1V-130...713.m153.l1262

Thanks, wanted to find out before I ordered it and wasted my money!

Ok an 11.1 volt would not ruin your Kraken, it would blow it up lol

So don't waste your money...

its not goin to work buddy. it will blow your gun to pieces. hahaa

thanks for the quick responses guys, out of curiousity, what beast of a gun takes these kind of batteries?

A gun with nicely reinforced internals and mechbox shell would be able to handle that kind of power. It would give an insane rate of fire though. Just the difference between an 8.4V and a 9.6V is pretty impressive. I can't imagine what an 11.1V would do.

thanks man, I used a 9.6v and it really did make a huge difference, that's why I was curious about the 11v batt

Am I looking for a shorter life in my gear box running a 9.6v 1400 intellect mini pack in my kraken?

Question.

Why did you buy a Kraken?

Good starter gun. Easy to upgrade, TM compatible. Cheap $$

To put things straight: If you DO put something more than 8.4v into the gun, IMMEDIATELY UPGRADE THE WIRING AND CONNECTORS! The shitty sub 16 gauge wire and the tamiya connectors aren't going to take it (not to mention the stock gearbox itself with the nylon bushings).

This being said, 8.4V is perfectly fine. I don't honestly see any point in increasing the voltage. If you want higher rate of fire, possibly invest in high speed gears/modular gear sets, or put in a lighter spring. Much less stress on your gearbox.

hey does anyone know were to get the AFTERMATH KIRENEX i had found a site for it and i went to look at it and it wasnt there anymore, so does anyone know were or if you can get them in canada???

Touche