Kraken Mechbox version?
 

Hey guys, i am wondering what mechbox version is on the buypaintball.ca Kraken?? (black/tan)

(i heave searched google and the forums but found nothing)

version 3 gearbox
\thread

Thank you, another question so i dont make more threads..

what website should i be looking at if i want to buy airsoft AEG parts?

airsoftparts.ca is good Jugglez is a good guy

+1 to Juggles

haha nice, i have been looking at the website before i asked the question.

and thank you again =)

im pretty sure all ak's have v3's the question then is it plasto-crap-tastic or metal?, and then if the answer is metal then the question becomes whats the quality of it?

ehobby and ebaybanned are two great sites for parts. evike is ok to me but some people would say otherwise

He said Kraken. So metal TM clone version 3 mechbox.

oh yes that he did. hes gonna have to start reading all the kraken threads

What size bushing should i get??? 6mm? oooh i have been reading the Kraken threads all day :P

Yes, the kraken is a version 3 mechbox with 6mm bushings.

If you're going to take the time to actually fix the gun out of the box, instead of watch it die slowly: www.mechbox.com has damned near everything you need to know about getting into mechboxs. With video. It's not a perfect website, but it's a good start.

thank you, i appreciate it

Modify 6mm Stainless Steel Bushings - Double Oil Channel
Modify Bearing Spring Guide - V3
Modify Stainless Steel Shims
Modify Cylinder Set - AK47 Series

so i ordered these, i hope i did the right thing :)

Good luck. Take your time, it'll be worth it.

fill in your profile with location etc. if you run into any problems, you can contact a local gun doc in your area

i actually spoke with him today, also met him at the local airsoft games.

sounds good man hope it goes well for you, with a little effort those krakens can be a good upgrade platform.

dont forget a new piston head

http://www.airsoftparts.ca/store2/in...roducts_id=683

:banghead: i hope its included in this?

why are you getting a bore up kit are you planning on 650mm inner barrel length +?

Maybe in the future, you should discuss your upgrade plans with a gun doc, and make a shopping list together.

Just a suggestion. :D

Big red piston head looking thing.

Do not get that... You'll produce a larger volume of air than you want to.

for a kraken the easiest thing to do (in terms of purchasing) is to purchase this:

http://www.airsoftparts.ca/store2/in...roducts_id=694


or to go like this:

Or, You could go for this:

http://www.airsoftparts.ca/store2/in...oducts_id=1104

It comes with; Piston, Piston head, airseal nozzle, cylinder head and cylinder.

IMO the modify kit is well worth it.

i put a 6 dollar G&P piston head in mine and it works quite well

just curious, the bore-up will not work with the stock barrel on the kraken???

It will, it's just not needed.

i am sorry guys... i completely wasted your time.. i did not order the Bore-up.. i actually ordered the one Amos suggested
1 ea. Modify Cylinder Set - AK47 Series $75.00...

i am sorry for wasting your time.. i linked the wrong set

we seem to be having issues with this cylinder set fitting into the Kraken though. (I know byblos and the local gun doc) Any suggestions?