Which is Real? Which is Airsoft?
 

Which is real Steel? which is Airsoft?

http://i372.photobucket.com/albums/o...d/DSC00886.jpg


I can't believe how good a job G&G did with the reproduction of this rifle. Sorry I don't have more/better, photos, but I will try to get better ones up ASAP.

Left = Airsoft

Right = Real Steel

I've seen the airsoft version up close...that gun is built very well with lots of attention to detail, not to mention it has lots of metal !!!

Left = RS
Right = Airsoft

Unless... that's a Black special..... Then it'd be vice versa..

sorry dude, the left is the airsoft one. G&G as a matter of fact. they recently made a 550 with green furniture. Its supposed to be a great rifle, especially stock according to the review on redwolf.

@ the OP, please post a review and pics when you can :)

left Airsoft
right real steel

I would say right is a Swiss arms black special. Reason - none of the airsoft 550's to my memory are totally black, out of the box that is.

The with of the body is a giveaway. Left is thicker.

And you can see part of the clear mag on the right one, wich look like the real deal.

lol I dunno. I've never gone to bed with the RS. Wouldn't be able to tell the difference :p

Also the cocking handle on the right one looks more robust... whereas the left one looks a little flimsy for RS

Doesn't look much flimsier than the one I handled :
http://img.photobucket.com/albums/v2...6/IMG_0029.jpg

My guess is the right is real steel because the receiver looks slightly thinner. Most AEGs typically have slightly wider receivers than their real steel counterparts to accomodate the mechbox.

Keep in mind it's 5.56, its not a big heavy round!

Yes but still... given how far the cocking handle comes out I doubt the manufacturers would put shitty cocking handle on it... Cocking handles break all the time on RS rifles. I've broken cocking handles on C9s before and the "tactical" cocking handle on the C7A2s break all the time as well.
But then again they do make the shitty "tactical" cocking handles for the C7A2.

PG,

We've broken 10% of the cocking handles on our unit's issued A2's. (The new "tactical" extended ones)

Had a discussion with the EME's on it already, and they're considering putting in a solid pin instead of the roll pin.

NS

Roll pins don't belong anywhere near high stress parts, IMHO.

Pass that on to Colt Canada....PLEASE....

NS

nice to see your new aeg congrates bud.

Thanks again to you bazza. Also, upon measuring the width of the receivers.... the two are the same width, about 35mm. And the pistol grip feels the proper size. (I also have a JG/Hurricane 552), and the grip is larger than my RS Black Special. (There was a big clue, eh?)
Weight distribution is the same, and the two are close to the same weight. About 7.5 lbs for airsoft to 8.5 lbs for RS.

I win?

they're both mine. I win :P

You got that right...good game!

Kos is the only one who loses. Hehe!