Upgrading a TM G36c
 

Hi,

I've had my TM G36c for 4 years now, some seasons I have used it quite a lot, others I played airsoft less and it didn't get used as much. I left it stock until the beginning of this year when in January I did some basic upgrades.

Systema oilless metal bushings

Prometheus Soft Type Hop Up bucking

Systema 120 spring - shoots 390 fps.

I was wondering if its necessary to put in a metal Spring guide with a ball bearing?

I am also considering put in a prometheus tightbore for increased accuracy and fps.

I could also make it a G36k, is the accuracy increase from the longer barrel worth the cost? (it would also look badass)

I know people usually have their own thoughts on whats necessary for upgrades,

Thanks for the input.

metal spring guide is a good idea.

also upgrade the tapet plate, piston, piston head, and the cylinder if you can.

HoJo and I discussed this about a billion years ago. This is a good start for upgrades. I always upgrade all inisde. why take the box apart few times to reapair as the stock itesm fail due to added stress?

Ok I can get a spring guide right away and will look into the other parts, thanks for the help.