Airsoft Canada - TM Mp5 Hopup issues

Airsoft Canada (https://airsoftcanada.com/forums.php)

- Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)

- - TM Mp5 Hopup issues (https://airsoftcanada.com/showthread.php?t=101225)

shiftline

March 28th, 2010 21:40

TM Mp5 Hopup issues

Myhop up wont stay in place i can pull it back, and every time i take a shot the bb pushes the hop-up and the little switch nudges further forward.. any idea why this is happening?

coach

March 28th, 2010 21:46

Re: TM Mp5 Hopup issues

Does the hopup lever have the rubber oring on the opposite side of gun? Try to snug it up by pushing it in further.

It shouldn't be loose but not super tight.

shiftline

March 29th, 2010 21:26

No it does not, it actually was coming out so i put on a snap ring.. so i should replace it with an O ring and that is what holds it in place?

coach

March 29th, 2010 21:57

Re: TM Mp5 Hopup issues

The oring adds some resistance/friction.

All times are GMT -4. The time now is 16:15.