WE SCAR wont fire
 

Hi guys, I was playing with my SCAR when suddenly all the gas vent out. I took a qui look inside and everything was normal but now it won't fire. I removed the lower receiver and put the mag in it to see what happens and it seem that the valve knocker doesn't hit the valve mag anymore. Not that it seem broken, but the valve knocker is hit slightly above the valve, no touching it. I mean that if the mag valve was a tad higher on the mag it would work. Any ideas? Thank you!

sounds like knocker delay stop is broken

Exactly like this in fact: http://www.airsoftforum.com/board/SC...tml&p=18156964

So I have to change to this? http://www.airsoftpost.com/images/la..._GR_567_lg.jpg

well make sure its the broken part first, but thats what my money is on

just a heads up, that steel part will wear out your hammer after a while, so eventually you'll have to replace the whole trigger group with steel parts

*edit* wait nvm thats just pot metal not steel, I got a steel one in mine, dunno how long that one will last, but it wont damage your hammer atleast

Ah ok I see, I'm in the middle of removing the trigger box so I'll chek :)

Here are the pictures, Everything looks fine to me but it's the first time I open it. What do you think?

http://img62.imageshack.us/img62/9906/img0917gt.jpg

http://img41.imageshack.us/img41/4797/img0915bw.jpg

yes its broken, you can see the middle pin is missing

Ok, thank you very much, I will order one from evike :)

Hum, I forgot how to install the valve knocker spring, can you help me again? thx

dont order from evike tho :S

lay the spring in the recess under where the knocker goes, with hammer cocked, then slide the knocker in from the back until its in place, then slide the cover on while holding it in place

What I don't understand is where the srping is suppose to catch? When I do that, it just pop anywhere in the trigger box?

it catches on the little nub on the bottom of the knocker assembly

Ok for this side but for the other side?

I'm taking a break before breaking something ^^

Any questions?

Not anymore lol :) I also foundf this YouTube- Trigger groupe WE Scar/PDW: Remontage (Airsoft)

Thx again!