Battery options for ICS SIG 552
 

Hi, picked up a Sig and I need a battery...8.4v supplied won't fit in the hand guard or the microscopic batt. box that came with it. :confused:

I need a lipo pack or peq. I don't want 11.1v. 'cuz I feel well placed shots win over rate of fire. My personal choice is a 9.6v@2700mah LiPo for the hand guard or a nicd in a peq.

Allowable dimensions for a LiPo in the handguard are:

L 132mm, W 21mm, H 16mm.

I'm in Vancouver and would like to know if anyone out there knows of someone local who has for sale a peq w/batt. (9.6v w/decent mah) or someone who can make a custom LiPo for the hand guard.

Cheers,
Ratters

Lipos only come in 3.7v denominations.

So your best bet would be a 7.4v lipo, and it won't be 2700mAh because that would be too big.

Oh No! not this again!

http://www.airsoftcanada.com/showthread.php?t=99765

This battery and PEQ box will work perfectly for the SIG-552

http://www.icsbb.com/web_e/html/02_p...kind3=&num=579

http://www.icsbb.com/web_e/html/02_p...kind3=&num=246


Send me an email for cost and pricing, or have the dealer you purchased it from give us a shout, and we'll hook them up with what you need.

Emilio.

I use a MARK III in my SIG 552 to set the ROF and find 11.1v fine to use. At least with a M110 spring this set up is holding fine. Oh and as far as I'm concerned a PEQ is just a way to make your gun unbalanced, the fancy way is the grenade launcher:)

All in all I have to say that DonP can hook you up with that MARK III and its a life saver on all your components, nearly a must for lipo if you want peace of mind.

ok, I declare this thread officially dead. I had forgotten that this issue was already discussed at length earlier. My appologies.
Those who viewed and responded , I respect and appreciate your tolerance.

I will be picking up a 9.6 and a peq tomorrow and perhaps doing the Mark III trigger master route next.
and remember kids "it's all fun and games 'till someone starts tweaking off Jib"
O.A.O.
Ratters

for sig 552, u either need a custome battery, or "something" else... <-- not sure if i'm allow to unveal it, but there are something else that will make everyone life easier...haha just wait and see

ICS Sig batt. options
 

Today I went to my local surplus depot and picked up a single pistol mag pouch. I removed the LEFT side rail and used it to hold the pouch as a batt. bag.

The pouch sits flush and does not flop around.

Run the wires through the other hanger strap (between the rail and bag) so a lucky shot doesn't take out your fuse holder!:rrr:

This is an inexpensive solution to using less volatile and less destructive,
9.6v NiMH packs.

Of course a LiPo with a MOSFET III makes me drool, that doesn't change the fact that cash is tight and I want TO PLAY!!! AARRGGGHHH!!!! KILL, KILL, KILL!!!

sorry..., time for my medication :roll:

I was then able to mount a $20.00 telescopic bi-pod to the lower rail and still have room for my hand placement on the foregrip without having to use a vertical tac grip.

OK pictures and description or it doesn't exist. And Lipo doesn't count. :P

pictures say a thousand words!
 

Understood Brother, As soon as I get some time I'll take some picks.
But first I'll go back to scouring the paint off my latest find...gotta love painted guns!

that was for bujitjit to post more info on his "secret" battery. LOL

A little secret
 

I'll let you in on a little secret. It's for all you Goons ( including yours truly )that love SigArms and are considering an ICS version but are hesitant 'cuz of the mags.

A couple days ago I picked up a TM Sig Commando. It was supposed to be upgraded with fancy this and fancy that but it wasn't ( I won't go into it ).
Anyhow it came with a slew of 43 round fake bullet mags. Initially I offered it up to the ics magwell and it seemed tight so I accepted defeat.

Today I said to myself "I'm not gonna be beat by no ****ing toy gun" and I applied a bit more elbow grease and......Ha! Psyche!

All kidding aside, YES, they worked. Three of the bunch were stubborn so I applied some silicone oil (heavier, not spray but spray will work) to the BB retainer at the top of the mag. Loaded about 5 rounds in each mag, fired 'em all and no misery.

Try it out(gently at first) ICS is a virgin to these mags you know!

Now wipe the sweat from your brow and rejoice!

inomini patri, spiritos sancte. Praise the nailed up one!!!
BooYaa!