Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Newbie Tank (https://airsoftcanada.com/forumdisplay.php?f=203)
-   -   Parts or just get full metal? (https://airsoftcanada.com/showthread.php?t=106114)

Brokenwings June 17th, 2010 20:59

Parts or just get full metal?
 
I want to convert my gun to full metal. it's an m4.

thing is i might want to get a different gun later on..

Do you guys think it would be cheaper/best just to buy a full metal gun or buy the metal parts then create it?

sewktbk June 17th, 2010 21:23

My suggestion would be : be patient.

Full metal guns are now legal in canada, so they are crossing the border bit by bit and getting approved as uncontrolled firearms. Which means, prices are gonna go down, my guess is substantially, over the next few weeks/months, since we wont have to rely on special orders to get them.

The thing is, restricted parts like full metal lower receivers will REMAIN prohibited. Long story short, This is because when these parts are not part of a gun, they are considered to be firearms because they can be modified to fire a live round (to summarize).

So basically, you will have affordable full metal guns, but full metal parts will still have to be purchased through special orders, which will mean still relatively expensive.

So i'd say be patient and buy a full metal gun a little later on wen prices have gone down.

The Chad June 17th, 2010 21:25

Yeah, I've heard prices are going to go down but still seeing metal bodies for 300 some odd friggin bucks. :(


That's $2 worth of tin cans.

Brokenwings June 17th, 2010 21:25

Oh shit i completely forgot about that...lower receivers. damn. alright. thanks man

Rock 'N' Roll Outlaw June 17th, 2010 21:26

It all depends what range of quality parts you want to use. Metal bodies tend to go for $150-$400, full internal upgrades for a clone would run you around $300-$500 for a drop in mechbox or full tune up kit, hopup, barrel and motor upgrades.

Depending on the route you choose either could be cheaper. Finding a good deal is good and all but dont cheap out too much and go for china ACM parts and a DBoys body or something.

Brokenwings June 17th, 2010 21:26

Quote:

Originally Posted by The Chad (Post 1256767)
Yeah, I've heard prices are going to go down but still seeing metal bodies for 300 some odd friggin bucks. :(


guess you cant order those and ship em to canada eh.

unless form a canadian retailer i guess

Brokenwings June 17th, 2010 21:27

i was thinking going CA or TM full metal. top brands i guess

sewktbk June 17th, 2010 21:31

you should consider WE as well in the mix. they make good guns.

Rock 'N' Roll Outlaw June 17th, 2010 21:32

Depends how much you are willing to spend and how much you take resale value into account. And yeah, don't try to order a receiver.

Going with either a CA or TM would give you as good a chance of a wise purchase as the other. Depending on the model of gun you are looking at (such as the M4 series) I would personally recommend the CA as the M4 from TM is notorious for its shoddy design leading to numerous physical degradation and damaging of the body, whereas the CA has come a LONG way from its state of having to rely on its metal body as a selling point to counter the TM in the market.

So depending on what gun you're looking at, try to find some reviews online and make a decision which warrants your money more than the other.


Quote:

Originally Posted by sewktbk (Post 1256777)
you should consider WE as well in the mix. they make good guns.

Hes looking for an AEG, not a gas gun. Given how new this person is I would advise he not venture into gas guns as they are money pits and would be better suited for someone with more experience especially with repairing them.


Quote:

Originally Posted by Brokenwings (Post 1256785)
good points. thanks. what about WE?
also, do full metal guns function perfectly fine with plastic mags? or could there be some troubles with them

There is no reason plastic would be an issue, but different manufacturers of mags may or may not be friendly with your setup. There are some brands that are known to just not work together (can't think of one off the top of my head at the moment) others are trial by fire. Get a hold of someone elses mags and see how they mingle and go from there.

Brokenwings June 17th, 2010 21:32

WE stands for?

haven't seen many of them around :S any reason why?

Brokenwings June 17th, 2010 21:34

Quote:

Originally Posted by Rock 'N' Roll Outlaw (Post 1256781)
Depends how much you are willing to spend and how much you take resale value into account. And yeah, don't try to order a receiver.

Going with either a CA or TM would give you as good a chance of a wise purchase as the other. Depending on the model of gun you are looking at (such as the M4 series) I would personally recommend the CA as the M4 from TM is notorious for its shoddy design leading to numerous physical degradation and damaging of the body, whereas the CA has come a LONG way from its state of having to rely on its metal body as a selling point to counter the TM in the market.

So depending on what gun you're looking at, try to find some reviews online and make a decision which warrants your money more than the other.

good points. thanks. what about WE?
also, do full metal guns function perfectly fine with plastic mags? or could there be some troubles with them

Twin#1[Op-for] June 17th, 2010 21:36

Quote:

Originally Posted by Brokenwings (Post 1256785)
good points. thanks. what about WE?
also, do full metal guns function perfectly fine with plastic mags? or could there be some troubles with them

Yes, metal guns use plastic mags fine. But if your going for full metal and willing to spend the cash, why not go for metal mags as well? More reliable and feel a lot better.

Brokenwings June 17th, 2010 21:44

i might save up in the long run over the summer a good 1000$. then ill check out the prices. might go for a different gun in the end. i fell in love with a scar blowback someone had XD

sewktbk June 17th, 2010 22:06

common....really? WE is really known in airsoft.

i mean theres PLENTY of WE guns in the AV retailer sections, in the classifieds, and a lot of threads talking about em...i mean you couldnt avoid noticing them if you wanted to...

http://shop.ehobbyasia.com/other-gun.../we/index.html
http://shop.ehobbyasia.com/pistols-g.../we/index.html
http://www.airsoftpost.com/index.php...e8ea5bcff03243


could go on and on....


Quote:

Originally Posted by Brokenwings (Post 1256782)
WE stands for?

haven't seen many of them around :S any reason why?


Brokenwings June 19th, 2010 10:42

ive only been learning about EAG's, those are mostly pistols and blowbacks. so yeah to me they weren't well known lol. but i've looked more into a blowback scar and see many WE's in general on the blowback isle so yeah i guess it is pretty popular. thanks again guys


All times are GMT -4. The time now is 07:54.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.