Need Help With Airsoft "Thunder" Grenade
 

Hey all I recently purchased a grenade from Capital Airsoft and am now having issues with it.
(This one exactly http://www.albertaairsoft.com/store/...d_product=711?)

I took it out on the weekend to try it out and see how it worked. After 2 successful trials I noticed after the second one that the main part of the grenade with the pin that punctures the CO2 cannister was pushed out. Now everytime I try to reset it and place a new sparklet inside the grenade the CO2 cannister gets punctured. For the life of me I can not find any information on this grenade in the form of assembly instructions/ diagrams to see if maybe I have reassembled it incorrectly. If there is anyone out there that could help me either send me a pm or repost here.

Thanks

Great White Hunter

So just to be sure i well understand your problem. You said the CO2 spartlet get puncture when you screw the bottom cap of the aluminium cylinder ?

If it's right, do you place the rubber ring correctly ?

When you assembled the grenade head do you:

1- Pull the hammer and secure it with the safety pin.
2- Insert the clear plastic spacer in the black threaded cylinder.
3- Put the rubber part with the perforation pin over the clear spacer
4- Then screw the black threaded cylinder in the grenade head
5- Crew the aluminium cylinder in the grenade head (not to tight)
6- Put the rubber ring (thin side down)
7- Add the CO2 spartlet
8- Screw the bottom cap (not to tight)

You may also watch my video
YouTube- CO2 Grenade Airsoft \ Paintball