Will Glock 17's threded barrel fin in Glock 19??
 

I'm trying to attach the silencer on the pistol but I want to make sure if they're compatible. There isn't lot of aftermarket parts for Glock 19...
The reason why I'm trying to fit 17's barrel in 19, is I can't find one for actual 19.

One more thing, is there any web site that I can find some extra parts for Glock 19 other than Ehobby or Redwolf??

no the barrels are not interchangeable

oh boy....then maybe I have to stick with just normal G19 since I can figure anything more...

Why not? If it's the same brand it will fit but just stick out more from the slide.

In my case, I've tried using G23 KJW threaded barrel on TM G26. To install you need to take the BBU out, but the gun won't function...

I'm going along with Styrak, if the barrels are from the same brand (ie. no KSC in TM) they should fit, the barrel will just be longer, then you get a machinist to make a custom one to hide the extra barrel, and you're good to go.

and you'd both be wrong.

KSC to KSC glock 17 and glock 19 can not use the same barrel. The same reason why you can not use Glock17 part#10 to replace glock19 part#8 they are not they same.

Glock 19 is a newer internal design. While i don't know for sure, if i was in your positions i wouldn't gamble my money guying something that'll be useless to me.

Yes...I've decided not to buy anything before I get the 100% accurate way.

Even if it did fit, I'd expect problems with the extra outer barrel length in terms of inhibiting the smoothness of the barrel tilting part of the action......

You never specifically said that this is a KSC/KWA, but I guess people are just assuming this based upon model number?

Edit: whoops didn't read your latest message, Ryan.

The "Lug's" on the bottom of the barrels are different and do not work for each other! I found out the hard way. I have two G19's,two G26C's a G23F and a G18C. The G-19 barrels works in the 26C's. The 19's & 26's you can swap,but the G-17 & 18's are all there own. I bought a G&G metal outer barrel with silencer adapter for my G-19's and it didn't work! Why?? because someone F*^ked up at G&G and put the "Lug" set for the G-17/18 on the barrel size for the 19. So now I have a barrel I can't use :( Hope that helps. Oh and this is for the KSC/KWA by the way,not sure about the TM stuff!

Explains why my G&G outer barrel for the G19 never worked in my metal slides, no matter where I sanded and filed down. Only ever got it to work in my stock plastic slide.

Regarding thhe above question, I can see the suppressor mounted on a barrel that sticks 1cm out from where it should will totally lock up the cam action (due to weight and outside the CG farther), causing each shot to spew gas because of not cycling properly. But that's just the beer talking.