Madbull Outer Barrel Sliding Off
 

Hello ASC! Here is my problem, hope someone can help me out!

So a while back I bought myself a Mad Bull M4/M733 10inch barrel. There was this little problem occurring how the "linear" portion of the barrel keeps sliding off. I found out that the "linear" part of the barrel attaches itself to the part you install into the receiver via two hex screws. I tightened it and all was good.

However, with me being able to go outdoor approaching I want to have a more permanent fix for this problem so I don't end up dropping a my entire front end (since I do not have a free float) into the ground when I go outdoor.

Solutions anyone? Complicated or simple I would be happy to hear from ya!

p.s. I'll upload pics tomorrow for a better idea since I feel like flopping onto my bed from all the thanksgiving food :)

Thanks in advance
Alex

I had the same problem with my ARES M4A1, what I did was drill bigger holes and used bigger set screws.