Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)
-   -   How do you adjust Hop Up-We Scar Gas Blow Back (https://airsoftcanada.com/showthread.php?t=113233)

joey1107 October 29th, 2010 20:12

How do you adjust Hop Up-We Scar Gas Blow Back
 
Just wondered how to adjust the hop up on my we scar gbb. Just got it and dont even know what the hop up looks like???

Deadpool October 29th, 2010 21:04

Cock back the charging handle and look inside the compartment. You will see a black plastic part. Turn it to adjust the hopup.

Ross October 29th, 2010 22:37

I find this method to not work. the ring is very stiff. I have to take the lower reciever off, the bottom rail, and take the brass barrel out. Pain in the butt.

AngelusNex October 29th, 2010 22:41

I use my knife/flat head screw driver to adjust it. Too stiff by hand. Twist down for more hop, up for less.

Zaphod October 30th, 2010 04:15

you can also reach up through the mag well and turn it.

joey1107 October 30th, 2010 10:20

Alright found it, now turning it, which way is up and which way is down? it looks like it turns either left or right when looking at it from the mag well with the gun upside down

AngelusNex October 30th, 2010 11:19

Quote:

Originally Posted by joey1107 (Post 1341051)
Alright found it, now turning it, which way is up and which way is down? it looks like it turns either left or right when looking at it from the mag well with the gun upside down

spin it clockwise for more hop. (that would be in the direction of the side with the bolt catch)

Brian McIlmoyle October 30th, 2010 23:29

righty tighty.. lefty loosie


All times are GMT -4. The time now is 12:04.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.