confirm this please, boot blackener
 

http://armyissue.com/cube/index.php?...&productId=739
this is boot blackener right?

If I recall correctly that is waterproof polish for combat boots. Not actually boot blackener. Boot blackener is a liquid that you coat the boot with.

know any place that i can get boot blackener
i don't care if it need to be mailed to me
thanks

That is Boot Paste for the WET WEATHER boots only, it is advised against using it on the GP boots, for the GPès just use boot polish, if you wish not to have a shine, dont buff them much :P

Go to a cobbler and ask for some black leather dye.

I use the Paste on both my wet weathers and my combats. Polish is only on my parade boots/shoes.

Works fine for me :/

This paste was developed to work on the CWW issue boots. To keep the leather soft and plyable and not clog up the pores of the leather to allow for the Gore-tex layer to vent through the boot leather. the paste was then popular with the Issue MkIV boots as it rejuvinated the leather without the "shine" typical to the 1980 era MkIII combat boots.
Boot Blackener was a Tin of leather dye developed to treat worn boots and re - Blacken the Brown rubbed and worn from field boots. The other tin often seen in the compny of the Blackener was Silicone to treat the Sticthes and boot over all. The CWW Gore tex certainly didn't need the Oil based pore clogging Kiwi Polish or the Silicone tins to clog up the works.
So Yes the EMU boot paste is great for your Mk III MkIV CCW Boots.